VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1975 Honda CB200T — Suspension et roues

For a CB200T suspension service order, start with the fork, hub or pivot component that needs attention, then identify the fitted assembly. A shared model category does not establish the dimensions of a modified front or rear end.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Suspension et roues

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB1100 CB900 CB750 type shock absorber nut 90309-315-000

Honda CB OEM Type Shock Absorber Nut ~ Replaces 90309-315-000

$3.95 USD
49-0779
Replace your shock absorber nuts with this Shock Absorber Nut, a replica of the OEM type used when installing shocks. Replaces OEM #90309-315-000.Note: 2...
Nouveau
Honda CB900 CB750 CB650 front wheel bearing retainer 44643-300-000

Honda CB Front Wheel Bearing Retainer ~ Replaces 44643-300-000

$16.95 USD
28-4016
Replace your front wheel bearing retainer with this Front Wheel Bearing Retainer, replacing OEM #44643-300-000. Exceptionally broad fitment across the SOHC and DOHC CB750...
Honda CB750 CB550 CB500 CB450 CB400 reflector 33741-340-670

Honda CB Stock Type Reflector ~ Replaces 33741-340-670

$21.46 USD
11-2303
Restore your mid-'70s Honda's stock reflectors with this Stock-Type Screw-On Reflector with a 6mm thread, replacing OEM #33741-340-670. Broad fitment covering the 1972-78 CB750...
Universal chrome shrouded 290mm shock absorber set side detail

Universal Motorcycle Shorty Shock Absorber Set ~ Chrome Shrouded 290mm

$119.95 USD
06-3591
Drop the back end with a clean all-chrome look using this Custom Shorty Shock Absorber Set. Chrome body and shroud with chrome progressive-wound springs,...
Universal black shrouded 290mm shorty motorcycle shock absorber set

Universal Motorcycle Shorty Shock Absorber Set ~ Black Shrouded 290mm

$129.95 USD
06-3590
Get the shortened look with a bit more coverage using this Custom Shorty Shock Absorber Set featuring a black body and shroud with black...
Épuisé
Universal black 290mm eye-to-eye shorty motorcycle shock absorber set

Universal Motorcycle Shorty Shock Absorber Set ~ Black Eye-to-Eye 290mm

$139.95 USD
06-3592
Go shorter with a different mounting configuration using this Custom Shorty Shock Absorber Set. Black body and shroud with black progressive-wound springs, 290mm (11...
Honda CB400 CB360 CB200 CB175 fork tube cap bolt with o-ring 94605-27101

Honda CB400 / CB360 / CB200 / CB175 Fork Tube Cap Bolt with O-Ring ~ Replaces Honda OEM 9461

$17.95 USD
29-6014
This aftermarket fork tube cap bolt with matching O-ring replaces Honda OEM #94605-27101 on compatible Honda CB front forks. It threads into the top...
Honda CB450 CB400 CB350 CB200 swingarm dust seal cap 52144-356-005

Honda CB Swingarm Dust Seal Cap ~ Genuine Honda 52144-356-005 ~ Replaces 52144-356-005

$24.95 USD
99-5170
This genuine Honda swingarm dust seal cap fits at the swingarm pivot / rear fork area on select Honda CB models. It helps cover...
Nouveau
Honda CB200 CB175 rear wheel damper bushing set 4 41241-307-010

1971-76 Honda CB200 / CB175 Rear Wheel Damper Bushing Set/4 ~ Replaces Honda OEM 41241-307-010

$14.95 USD
28-6917
This aftermarket rear wheel damper bushing set replaces Honda OEM #41241-307-010 for select vintage Honda CB models. These rubber damper bushings fit into the...
Épuisé
Universal black 290mm shorty motorcycle shock absorber set

Universal Motorcycle Shorty Shock Absorber Set ~ Black 290mm

$139.95 USD
06-3589
Slam the back end with this Custom Shorty Shock Absorber Set, measuring 290mm (11 3/8") eye-to-clevis, noticeably shorter than stock for custom café, bobber,...
Comparer

1975 Honda CB200T · Suspension & Wheel Buying guide

Choose service hardware for the assembly under repair

Fork caps, a front wheel bearing retainer and swingarm dust caps address separate service points. Compare each part with the fitted assembly instead of treating the selection as a combined repair kit.

Parts to consider

Honda CB400 / CB360 / CB200 / CB175 Fork Tube Cap Bolt with O-Ring ~ Replaces Honda OEM 9461 Fork cap bolt with O-ringAftermarket cap with 27 × 1.0 mm thread, 17 mm hex and matching O-ring. Sold individually.Voir la pièce Honda CB Front Wheel Bearing Retainer ~ Replaces 44643-300-000 Front wheel bearing retainerReplacement front wheel bearing retainer referenced to 44643-300-000. Confirm the hub if the wheel has been changed.Voir la pièce Honda CB Swingarm Dust Seal Cap ~ Genuine Honda 52144-356-005 ~ Replaces 52144-356-005 Genuine Honda swingarm dust capGenuine Honda 52144-356-005 swingarm-pivot dust seal cap. Sold individually.Voir la pièce

Pièces connexes : Stock-type shock mounting nut

Match service parts to the installed assembly

The fork cap uses a 27 × 1.0 mm thread and includes an O-ring; the bearing retainer is for the front hub. A changed fork or wheel can alter either requirement. Identify the fitted assembly before using the CB200T application to plan the order.

Check the pivot dust-cap order separately

The genuine Honda swingarm dust cap is sold individually. Check the pivot arrangement and the number of caps required for the motorcycle before setting the purchase quantity. A changed swingarm needs its own part identification; the frame model does not establish its service hardware.

Buying questions

Does the fork cap include its seal?

Yes. The aftermarket cap includes a matching O-ring and is sold individually. Compare its 27 × 1.0 mm thread with the forks on the motorcycle, particularly if the front end has been replaced.

What should I match before buying the front-wheel retainer?

Compare reference 44643-300-000 with the retaining arrangement in the fitted front hub. If the wheel or front end has been changed, identify the hub first rather than selecting its hardware from the frame model alone.

Does one swingarm dust cap cover the whole pivot?

The product is sold individually, and no CB200T-specific installed quantity is established here. Check the fitted pivot or the correct parts reference before ordering enough caps for the job.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1975 Honda CB200T

Votre panier

×