VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1975 Honda CB200T — Guidon et commandes

The CB200T handlebar selection covers the parts you hold and the clamps that secure the bars. Compare the fitted bar diameter, throttle arrangement and upper mounting before choosing the 135 mm closed-end grips or black clamp set for a restoration or repair.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Guidon et commandes

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Type closed-end grips end detail 53165-342-670

Honda OEM Type Closed-End Grips ~ Replaces 53165-342-670

$17.95 USD
02-2423
Take your early-'70s Honda back to factory spec with these Honda OEM-Type Rubber Grips. Faithful replicas of the original factory grips, in black closed-end...
Honda CB750 CB550 black handlebar clamp set 2 7 8 in. 95014-22200

Honda CB Black Handlebar Clamp Set/2 ~ 7/8 in. ~ Replaces 95014-22200

$32.95 USD
73-1120
Secure your handlebars with confidence using this Black Handlebar Clamp Set. Designed for 7/8" bars, these clamps replicate the stock look and function while...
Comparer

1975 Honda CB200T · Grips & Clamps Buying guide

Match the grip area and bar mounting separately

The grips and clamps both specify 7/8-inch bars, but they require different checks. Grip length and end style concern the controls, while clamp mounting and hardware concern the upper bar support.

Parts to consider

Honda OEM Type Closed-End Grips ~ Replaces 53165-342-670 Closed-end replica gripsBlack rubber, stock-style replica grips for 7/8-inch bars. The specified length is 135 mm.Voir la pièce Honda CB Black Handlebar Clamp Set/2 ~ 7/8 in. ~ Replaces 95014-22200 Black handlebar clamp setSet of two black replica clamps for 7/8-inch handlebars, referenced to 95014-22200.Voir la pièce

Measure the space beside the fitted controls

The black replica grips are 135 mm long with closed ends. Compare the available grip area and throttle arrangement before ordering, especially if the bars or control housings have been changed. Check bar-end accessory requirements separately from the stock-style appearance.

Treat the clamps as their own purchase

The black clamp set contains two clamps for 7/8-inch handlebars. Compare the upper mounting arrangement before ordering. A bar’s correct diameter does not by itself confirm that the clamps suit a substituted top yoke or custom risers; inspect the mounting geometry and required fasteners.

Buying questions

Are these genuine Honda grips?

They are stock-style aftermarket replicas, described as black rubber with closed ends. The stated dimensions are 7/8-inch bar application and 135 mm length; genuine Honda manufacture is not claimed for this grip product.

Are mounting bolts included with the clamp set?

The supplier offers mounting hardware separately but does not itemize bolts in the clamp package. Confirm the supplied contents if you need new fasteners, and match the hardware to the fitted mounting arrangement.

Will the grips work with bar-end accessories?

The featured grips have closed ends. Compare that design with the mounting requirements of your bar-end accessories and throttle arrangement before ordering; do not assume an open-end accessory installation is supported without further checks.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1975 Honda CB200T

Votre panier

×