VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1976 Honda CB750K — Pignons et couronnes

Front and rear steel sprockets for the 1976 Honda CB750K are listed with 18 and 48 teeth for the stock 530 chain, along with the lock plate, tongued washers and stud bolts that secure them. Count the teeth on your current sprockets first.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Pignons et couronnes

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 rear sprocket washer set 94108-17000

1969-78 Honda CB750 Rear Sprocket Washer Set

$9.50 USD
29-7012
Replace your rear sprocket lock washers with this Rear Sprocket Tongued Lock Washer 2-pack, replacing OEM #94108-17000.Key Features• Rear sprocket tongued lock washer, 2-pack•...
Honda CB750 CB650 CB550 front sprocket lock plate set 23811-292-000

Honda CB Front Sprocket Lock Plate Set ~ Replaces 23811-292-000

$5.95 USD
49-0782
Replace your front sprocket lock plate with this Front Sprocket Lock Plate with 2 lock plate bolts. Always good to replace these when installing...
Honda CB750K steel front sprocket 18 tooth x 530 23801-300-620

1972-76 Honda CB750K Steel Front Sprocket ~ 18 Tooth X 530 ~ Replaces 23801-300-620

$34.95 USD
23-0401
Replace your SOHC CB750K front sprocket with this Steel Front Sprocket, 18 tooth, for 530 chain setup as came stock. Replaces OEM #23801-300-620.Please count...
Honda CB750A CB750F CB750K steel rear sprocket 48 tooth x 530 type 41201-300-870

1970-76 Honda CB750A / CB750F / CB750K Steel Rear Sprocket ~ 48 Tooth X 530 Type ~ Replaces 41201-300-870

$74.95 USD
22-0303
Replace your SOHC CB750 rear sprocket with this Steel Rear Sprocket with Dust Plate, 48 tooth, for 530 chain setup as came stock. Replaces...
Honda CB750A CB750F CB750K rear sprocket bolt and nut set 90128-341-000

1972-78 Honda CB750A / CB750F / CB750K Rear Sprocket Bolt & Nut Set ~ Replaces 90128-341-000

$13.95 USD
29-7023
Restore your rear sprocket hardware with this Rear Sprocket Stud Bolt (12 x 54) & Nut Set. Set includes 4 stud bolts and 4...
Nouveau
Honda CB750 primary chain tensioner

1969-78 Honda CB750 Primary Chain Tensioner ~ Genuine Honda Brand

$219.95 USD
99-5460
Upgrade or restore your classic Honda motorcycle with this Primary Chain Tensioner — a genuine Honda brand part engineered for correct fit and dependable...
Comparer

1976 Honda CB750K · Sprockets Buying guide

Gearing and hardware together

Both sprocket listings ask you to count teeth and check chain length before ordering. Plan the retaining hardware at the same time, because the lock plate and tongued washers are inexpensive and listed separately.

Sprockets and fasteners

1972-76 Honda CB750K Steel Front Sprocket ~ 18 Tooth X 530 ~ Replaces 23801-300-620 18-tooth steel front sprocketStock 530 pattern listed for the 1972-76 CB750K as a replacement for 23801-300-620.Voir la pièce 1970-76 Honda CB750A / CB750F / CB750K Steel Rear Sprocket ~ 48 Tooth X 530 Type ~ Replaces 41201-300-870 48-tooth steel rear sprocketSupplied with a dust plate for the 530 chain; the 1972-76 CB750K is in its application.Voir la pièce 1972-78 Honda CB750A / CB750F / CB750K Rear Sprocket Bolt & Nut Set ~ Replaces 90128-341-000 Rear sprocket stud and nut setFour 12 x 54 stud bolts and four nuts that fasten the wheel flange to the rear sprocket.Voir la pièce

Pièces connexes : Front sprocket lock plate · Rear sprocket lock washers

Check the chain as well

The sprocket listings ask you to check chain length, yet no drive chain is listed in this category. Inspect the chain you have, confirm it is the 530 type and measure its length before pairing it with new 18-tooth and 48-tooth sprockets.

Small retaining parts

The front lock plate listing includes two bolts and suggests renewing it whenever a new front sprocket goes on. The rear tongued lock washers come as a pair, and the stud set supplies four bolts with four nuts. Check how many your hub uses.

Sprocket questions

Are these the stock tooth counts?

The listings describe the 18-tooth front and 48-tooth rear sprockets as the stock 530 setup. Gearing may have been changed on your bike, so count the teeth on the fitted sprockets before relying on that description.

Does the rear sprocket include the dust plate?

Yes. The rear sprocket listing describes a steel 48-tooth sprocket with dust plate. Fastening hardware is not mentioned, so check the stud bolt, nut and lock washer listings for the parts you need.

Is the primary chain tensioner a sprocket part?

No. The genuine Honda primary chain tensioner appears in this category but belongs to the internal primary drive of the engine. Plan it with bottom-end engine work rather than with external sprocket replacement.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1976 Honda CB750K

Votre panier

×