Pièces pour motos Honda
Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.
Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.
1976 Honda CB750K · Fuel System Buying guide
The rebuild kit and separate float valve explicitly list the 1976 CB750K in their application sections. The kit covers one carburetor; the float-valve set is a narrower purchase when only the needle and seat are needed.
1976 CB750K carburetor repair kitJapanese-made kit for one carburetor, with bowl and top gaskets, O-rings, float needle and seat, #105 main and #40 pilot jets, needle, adjusting screw and spring.Voir la pièce
M20 × 1.5 replacement petcockReplaces 16950-341-671. Compare its M20 × 1.5 connection with the actual tank before ordering.Voir la pièce
Stock-type air-filter elementReplaces 17211-405-000 and lists the 1969–78 CB750K application. Identify the retained airbox before ordering an element.Voir la pièce
Pièces connexes : 1976 CB750K float valve · 40-inch throttle pull cable · Four-piece carb-holder set
Retaining the airbox calls for the stock-type filter and the appropriate carb-to-airbox boots. The holder set is a different purchase from those boots. Identify which rubber connection needs repair before combining a four-piece set with individually ordered boots.
The 1975–76 reproduction tank arrives in primer grey. Lay out the cap, latch, petcock, emblems and mounting pieces you intend to reuse before refinishing; their condition can change the order even when the tank itself is the correct application.
One kit rebuilds one carburetor. It supplies a #105 main jet and #40 pilot jet; those are package contents, not a tuning prescription for a changed intake or exhaust.
Compare the petcock’s stated M20 × 1.5 thread with the fitted tank connection. The model year alone cannot identify the outlet on a substituted tank.
The reproduction tank excludes the cap, petcock, side emblems and all additional hardware. Check which of those parts you can retain before ordering replacements.
Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.
Sélectionnez le modèle exact et l’année pour affiner les résultats.
Choisissez votre modèle et l’année.