Pièces pour motos Honda
Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.
Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.
1976 Honda CB750K · Ignition Buying guide
Identify the ignition already fitted before choosing points, condensers or a Dyna S module. For an electronic conversion, compare the retained coils and the package contents rather than adding points-service parts to the same repair by default.
NGK D8EA spark plugD8EA replacement plug listed for the 1976 CB750K; the description specifies four plugs per CB750.Voir la pièce
Right-hand contact-point assemblyOne piece for cylinders 2 and 3, replacing 30204-300-005. The separate left-hand product covers cylinders 1 and 4.Voir la pièce
Dyna S ignition module onlyElectronic ignition supplied without a coil bundle, listed for the 1969–78 CB750K. Compare existing coils before choosing this package.Voir la pièce
Pièces connexes : Left-hand points for cylinders 1 and 4 · Separately sold points condenser · Square four-prong ignition switch
The right and left point assemblies are separate one-piece listings. The condenser replaces 30250-300-154 or 30250-300-005 and lists two per CB750. Count the pieces required for the repair rather than interpreting each points or condenser listing as a complete ignition-service kit.
The ignition switch lists references 35100-374-007, 35100-369-740 and 35100-341-700 with a square four-prong connector for the 1973–76 CB750K. Compare that connector with the actual loom, particularly if the wiring has been replaced.
Both include the Dyna S module and Dynatek plug wires. The Premium listing supplies two generic aftermarket 3.3-ohm dual-output coils; the Ultimate listing supplies two Dynatek-brand 3-ohm dual-output coils. Compare the coil brand and specification rather than assuming both bundles contain the same coils.
Its listing permits stock coils or coils rated 3 ohms or higher. Identify the fitted coils and confirm their specification against the ignition instructions before choosing the module-only package; do not use appearance or a general CB750 fitment label to establish compatibility.
The two-coil package replacing 30500-300-013 is already pre-mounted on brackets and lists a 4.3-ohm primary and 15,000-ohm secondary. Compare its supplied mounting arrangement with the bike before adding separate coil brackets or clamps.
Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.
Sélectionnez le modèle exact et l’année pour affiner les résultats.
Choisissez votre modèle et l’année.