Step up your ignition with this Performance High Output 5.2 Ohm Dual-Output Ignition Coil. Primary resistance of 5.2 Ohm, secondary of 17K Ohm, designed to replace stock factory ignition coils on 1970-and-up SOHC and DOHC CB750 models plus CB900/CB1100 variants. Works with electronic ignitions, and hardware is included.
Requires 7mm diameter high-tension spark plug wires (sold separately) and 5K Ohm spark plug caps.
Warning: serious high voltage. Do not operate or apply power to the ignition system with one or both spark plugs disconnected. Doing so will cause IMMEDIATE FAILURE of the coil. Ignition coils are NOT WARRANTIED against this.
Key Features
• Dual-tower high-output ignition coil
• 5.2 Ohm primary, 17K Ohm secondary
• Works with electronic ignitions
• Hardware included
• 2 coils used per bike (order quantity needed)
• Requires 7mm plug wires and 5K Ohm plug caps
Fitment / Compatibility
• All Honda CB750 models (1970‑78)
• All Honda CB750 models (1979‑82)
• All Honda CB700 / CB750 models (1982‑83)
• All Honda CB900 / CB1100 models
Part Number: 07-9973
Vérifiez le modèle et l’année indiqués, puis lisez les notes de compatibilité dans la description.
| Marque | Modèle | Année |
|---|---|---|
| Honda | CB750K Standard | 1969 |
| Honda | CB750K | 1970 |
| Honda | CB750K | 1971 |
| Honda | CB750K | 1972 |
| Honda | CB750K | 1973 |
| Honda | CB750K | 1974 |
| Honda | CB750K | 1975 |
| Honda | CB750F Supersport | 1975 |
| Honda | CB750K | 1976 |
| Honda | CB750F | 1976 |
| Honda | CB750A Hondamatic | 1976 |
| Honda | CB750P Police | 1976 |
| Honda | CB750K | 1977 |
| Honda | CB750F | 1977 |
| Honda | CB750A | 1977 |
| Honda | CB750K | 1978 |
| Honda | CB750F | 1978 |
| Honda | CB750A | 1978 |
| Honda | CB750P | 1978 |
| Honda | CB750K Standard | 1979 |
| Honda | CB750F Supersport | 1979 |
| Honda | CB750L Limited | 1979 |
| Honda | CB750K | 1980 |
| Honda | CB750F | 1980 |
| Honda | CB750C Custom | 1980 |
| Honda | CB750P Police | 1980 |
| Honda | CB750K | 1981 |
| Honda | CB750F | 1981 |
| Honda | CB750C | 1981 |
| Honda | CB750K | 1982 |
| Honda | CB750F | 1982 |
| Honda | CB750C | 1982 |
| Honda | CB750SC Nighthawk | 1982 |
| Honda | CB750SC | 1983 |
| Honda | CB900C Custom | 1980 |
| Honda | CB900C | 1981 |
| Honda | CB900F Supersport | 1981 |
| Honda | CB900C | 1982 |
| Honda | CB900F | 1982 |
| Honda | CB1000C Custom | 1983 |
| Honda | CB1100F Supersport | 1983 |
Aucun modèle répertorié ne correspond à votre recherche.
Livraison terrestre gratuite à partir de 50 $
Aux États-Unis et au Canada. Les commandes en stock quittent habituellement notre entrepôt le jour ouvrable même ou le suivant.
| Destination | Délai de livraison |
|---|---|
| États-Unis | 3 à 7 jours ouvrables |
| Canada | 2 à 6 jours ouvrables |
La livraison terrestre comprend un suivi, envoyé par courriel à l’expédition. Besoin de vos pièces plus rapidement? Des options express sont proposées au paiement.
Retours sous 60 jours pour les pièces admissibles
Aucuns frais de remise en stock. Les pièces admissibles doivent être inutilisées, non installées, non modifiées et complètes. Le délai de 60 jours commence à la livraison de votre commande.
Les pièces électriques sont exclues des retours standards. Vérifier l’admissibilité au retour.
Commencez votre demande de retour ci-dessous. Attendez nos instructions avant d’expédier une pièce.
Demander un retourAutres options de livraison
Service économique de Postes Canada : Proposé au paiement pour certains petits articles. Prévoyez de 1 à 3 semaines pour la livraison. Aucun suivi ni assurance ne sont inclus.
Hors des États-Unis et du Canada : Les délais varient selon la destination et le mode de livraison. Les acheteurs sont responsables des droits de douane, taxes et frais d’importation applicables. Nous ne pouvons pas déclarer les commandes comme des cadeaux.
Questions fréquentes
How many 5.2-ohm dual-output ignition coils are included and required for the compatible Honda CB four-cylinder models?
One dual-output coil is included. The listed Honda CB four-cylinder ignition systems use two dual-output coils, so two are required to replace both coils on one motorcycle.
What plug wires and caps are required with performance coil 07-9973?
The coil requires 7mm high-tension spark-plug wire and 5K-ohm spark-plug caps, both sold separately. Coil mounting hardware is included; confirm that the ignition system is compatible with the coil's 5.2-ohm primary and 17K-ohm secondary resistance.
Can the ignition be powered with one output of this dual-output coil disconnected?
No. Do not crank or operate the ignition with either spark-plug output disconnected. Both high-tension leads must terminate at correctly installed spark plugs because an open secondary circuit can immediately damage the coil.