Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

Consultation en cours Clignotants, supports, cabochons et réflecteurs

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB900 / CB750 / CB650 Turn Signal Relay ~ Replaces 38301-415-671

$11.69 USD
73-1104
Replace your turn signal flasher relay with this Turn Signal (Flasher) Relay, 12V/23W, 3-prong, with rubber mount attached. For the series 2 and later...

Honda CB Stock Type Reflector ~ Replaces 33741-340-670

$21.46 USD
11-2303
Restore your mid-'70s Honda's stock reflectors with this Stock-Type Screw-On Reflector with a 6mm thread, replacing OEM #33741-340-670. Broad fitment covering the 1972-78 CB750...

Honda CB Stock Type Front Reflector Rubber Base ~ Replaces 33743-341-670

$8.95 USD
11-2304
Fit the rubber base beneath your stock front reflector with this Stock-Type Front Reflector Rubber Base, replacing OEM #33743-341-670.Key Features• Stock-type front reflector rubber...

1971-74 Honda CB750K / CB550K / CB500K Rear Turn Signal Stay ~ Replaces 33607-323-670

$19.95 USD
11-2319
Fit the standard-length rear signal stay with this Rear Signal Lamp Stay in chrome, 65mm long, replacing OEM #33607-323-670. Pairs with signal lamp #11-2122....

1971-74 Honda CB750K / CB550K / CB500K Rear Turn Signal Mount & Collar Set ~ Replaces 33605-323-670

$42.95 USD
73-0127
Mount your rear signals with this Rear Turn Signal Mount, Collar and Rubber Set. Includes both left and right sides. Needed when installing the...

Honda CB Front Turn Signal Stay

$12.95 USD
11-2167
Replace a damaged front signal stay with this Front Signal Lamp Stay in chrome. Body length 65mm, thread 25mm, total length 90mm. Pairs with...

1972-74 Honda CB750K Rear Turn Signal Stay Screw Set/2

$8.95 USD
49-0001
Replace your rear turn signal stay screws with this Rear Signal Lamp Stay Screw Set of 2. Includes the screws that fasten the rear...

1969-74 Honda CB750K / CB550K / CB500K Turn Signal Pinch Bolt Set

$7.00 USD
73-0840
Replace your turn signal mounting hardware with this Turn Signal Pinch Bolt Set. Includes 2x chrome bolts, 2x hex nuts, and 4x flat washers,...

Honda CB750 / CB550 / CB500 / CB350 Front Turn Signal Stay

$13.95 USD
73-1106
Mount a front turn signal with this Front Signal Lamp Stay, Chrome.Body length 40mm, thread 30mm, total length 70mm.Note: we sell these in various...

Honda CB Turn Signal Lamp Gasket ~ Replaces 33443-268-671

$4.61 USD
11-2085
Service your early CB750 or classic twin turn signal with this Turn Signal Lamp Gasket, replacing OEM #33443-268-671. Pairs with our signal lens #11-2110...

Honda CB750 / CB550 / CB500 / CB350 Front Turn Signal Stay ~ Short Type

$13.95 USD
73-1105
Mount a front turn signal with this Front Signal Lamp Stay with nut and washer, Short Type, Chrome.Body length 26mm, thread 21mm, total length...

Honda CB Rear Turn Signal Stay ~ Replaces 33441-369-000

$18.95 USD
11-2318
Fit an extended-length rear signal stay with this Rear Signal Lamp Stay in chrome, 125mm long, replacing OEM #33441-369-000. This is longer than the...

1974 Honda CB750K · Turn Signals Buying guide

Match signal lamps, stems and lenses as a set

The lamp body, stem and lens each have their own fitment checks. Use the listed pairing information and front or rear application to avoid choosing parts simply because they look alike.

Repair the part that is damaged

If the lamp body and mounting remain sound, compare a replacement lens and gasket before buying a complete lamp. The amber lens and gasket listings identify their matching lamp. Check the housing and screw locations too, because aftermarket signals may resemble stock lamps without sharing their service parts.

Keep mounting position and length in view

The featured rear stay is listed as a 65mm stock-length chrome part for the 1974 CB750K. Longer and short-type alternatives also appear in this category. Compare your bike’s existing arrangement and intended mounting position rather than treating front, rear and custom stems as interchangeable.

Common questions

Are one-wire and two-wire signals interchangeable?

Do not choose by appearance alone. The featured amber lamp is listed as a 12V two-wire type, and a separate one-wire product is available. Confirm the connection and grounding requirements of the lamp and your harness.

Can I replace the lens without replacing the complete signal?

Compare the lamp body with the lens listing first. The featured amber lens explicitly pairs with the featured amber lamp, and a matching gasket is listed separately. An unidentified aftermarket housing needs its own compatibility check.

Is every rear signal stay the original length?

No. The featured rear stay is listed as 65mm, with a longer version offered separately. Check the dimensions and application on the individual listing, particularly when the bike has custom lamps or altered rear mounting.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité

Votre panier

×