Pièces pour motos Honda
Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.
Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.
1974 Honda CB750K · Fuel System Buying guide
A carburetor rebuild, tank repair and intake refresh involve different parts. Identify the source of the problem first, then compare individual listings with your CB750K's carburetors, airbox and fuel tap.
Stock-type air filterFor the stock intake. Replaces 17211-405-000.Voir la pièce
Carburetor rebuild kitServices one carburetor. Includes gaskets, jets, float needle and seat.Voir la pièce
Fuel petcockIncludes internal gaskets and strainers. Replaces 16950-300-020.Voir la pièce
Pièces connexes : Carb holder set · Gas cap seal · Carb fuel connector seals
A hardened intake boot, damaged float-bowl seal or worn fuel tap needs attention on its own. Buying a different jet size does not address those faults. Record what is fitted and use the service manual's diagnostic checks before deciding whether the repair involves seals, fuel delivery or carburetor tuning.
A stock air filter belongs to the original airbox; clamp-on pod filters and velocity stacks are different arrangements. For a modified intake, compare carburetor inlet diameter, clearance and support requirements. Review carburetor settings for the complete intake and exhaust configuration rather than treating a filter swap as a complete tuning solution.
The featured kit is listed for one carburetor. Decide how many carburetors need rebuilding and check the contents of each kit. Separate floats, intake rubbers and some fuel connector seals are available as individual products or sets.
Compare the fitted tap and the gasket's stated application. Some listed seals are specifically for original OEM petcocks. A replacement tap that resembles the original can have different internal sealing parts, so appearance alone is not sufficient.
The 1971–76 holder set supplies four holders. Its description calls for eight separate 46–49 mm band clamps when clamps are needed. Check the existing clamps before adding them; the four holders are not an eight-clamp package.
Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.
Sélectionnez le modèle exact et l’année pour affiner les résultats.
Choisissez votre modèle et l’année.