1976 Honda CB360T Fork Seals & Dust Boots

Narrow by Subcategory

Currently viewing Fork Tubes, Springs, Seals & Boots

Honda motorcycle parts

Choose your model and year to see parts listed for your bike.

Sort by

Honda CB750 CB550 CB500 CB450 CB400 reflector 33741-340-670

Honda CB Stock Type Reflector ~ Replaces 33741-340-670

$21.46 USD

Restore your mid-'70s Honda's stock reflectors with this Stock-Type Screw-On Reflector with a 6mm thread, replacing OEM #33741-340-670. Broad fitment covering the 1972-78 CB750...

Honda CB450 / CB400 / CB360 Fork Seals

$21.95 USD

Replace your CB400 or CB360 fork seals with this Fork Seal Set, 33 x 46 x 11mm. Made in Japan by OEM supplier.Key Features•...

Honda CB450 CB400 CB360 CL360K0 fork dust boot set 91254-413-881

Honda CB Fork Dust Boot Set ~ Replaces 91254-413-881

$15.95 USD

Refresh your fork seal dust boots with this Fork Seal Dust Boots Set of 2. 33mm size. Replaces OEM #91254-413-881.Key Features• Fork seal dust...

Honda CB1100 CB1000 CB900 CB750 16mm clutch oil filter rotor lock nut 90231-KCS-651

Honda CB 16mm Clutch / Oil Filter Rotor Lock Nut ~ Genuine Honda 90231-KCS-651 ~ Replaces 90231-KCS-651

$10.95 USD

This genuine Honda 16mm lock nut is used on compatible Honda CB clutch basket and oil filter rotor assemblies. It is a small hardware...

Honda CB400 CB360 CB200 CB175 fork tube cap bolt with o-ring 94605-27101

Honda CB400 / CB360 / CB200 / CB175 Fork Tube Cap Bolt with O-Ring ~ Replaces Honda OEM 9461

$17.95 USD

This aftermarket fork tube cap bolt with matching O-ring replaces Honda OEM #94605-27101 on compatible Honda CB front forks. It threads into the top...

compare

1976 Honda CB360T · Fork Seals & Boots Buying guide

Plan the fork seal and dust-boot work together

Oil seals and dust boots address different parts of the fork assembly. Check both before ordering, and inspect the upper cap hardware if it is damaged or missing. A changed front end needs its own parts identification.

Parts to consider

33mm fork seal setFork seals measuring 33 × 46 × 11mm, listed for CB360T models.View part

Honda CB Fork Dust Boot Set ~ Replaces 91254-413-881

Fork dust-boot pairSet of two 33mm dust boots, referenced to Honda 91254-413-881.View part

Related parts: Fork cap bolt with O-ring

Check the tubes as well as the rubber

A seal purchase should follow an inspection of the fork tubes and the dust-boot area. Note any damage or corrosion that needs attention during service. Order the oil seal set and separate dust-boot pair according to the condition of those components, using the correct fork identification.

Match the upper cap to the fork

The linked aftermarket cap replaces the CB360T reference 94605-27101 and comes with an O-ring. It has a 27 × 1.0mm thread and 17mm hex, and is sold individually. Use the Honda service manual for fork disassembly and assembly rather than improvising around spring pressure.

Buying questions

Does the seal set include the dust boots?

The oil seal set and two-piece dust-boot set are separate products. Inspect both areas before ordering. The offered seals measure 33 × 46 × 11mm; the dust boots are listed as 33mm for the CB360T application.

How many cap bolts should I order?

The linked cap bolt is sold individually with its O-ring. There is one cap per fork leg, so replacing both requires two. Confirm the 27 × 1.0mm thread and the actual fork assembly before ordering.

Will these seals suit replacement forks on my CB360T?

Identify the replacement forks and compare the required seal dimensions first. These seals are selected for the listed CB360T application; the motorcycle model alone does not establish the dimensions needed by a swapped front end.

Not sure which part you need?

Send your model and year, plus photos of your existing part and any changes to the original setup.

Ask a fitment question

Parts categories for 1976 Honda CB360T

Help & information

Select your bike

Search parts

Shop By Category