Honda motorcycle parts
Choose your model and year to see parts listed for your bike.
Choose your model and year to see parts listed for your bike.
1972 Honda CB500K · Shock Absorbers Buying guide
The selected chrome set measures 321mm center of eye to clevis, while the black set is 335mm eye-to-clevis. Both list CB500K applications, but the different dimensions must be considered against the motorcycle’s existing arrangement.
321mm chrome stock-design setCB500K-listed shocks with chrome body, cover and springs, measured at 321mm center of eye to clevis. The specified preload adjustment has five positions.View part
335mm black shock setEye-to-clevis black shocks measuring 335mm with four-position preload. Bushings, inserts, washers and a preload wrench are listed; compare this longer option with the fitted setup.View part
Two shock joint rubbersTwo-piece rubber set referencing 52484-292-000. These are joint rubbers for the listed shock application, rather than the rear-wheel drive damper set.View part
Related parts: Replica shock mounting nut
The chrome stock-design set has five-position preload and a stated 321mm eye-to-clevis measurement. The black alternative has four-position preload and measures 335mm. Its product wording calls it stock length across several models, but those two measurements are not identical; use the fitted CB500K arrangement when making the choice.
The two joint rubbers reference 52484-292-000. The replica nut references 90309-315-000, with one supplied and two required for both corresponding mounts. Inspect the actual mounting pieces before adding them to the order; rear-wheel drive dampers are a separate product and should not be used as shock joint rubbers.
The stock-design chrome pair is 321mm from upper-eye center to clevis with five preload positions. The all-black pair is 335mm eye-to-clevis with four positions. Compare the fitted length and mounts before selecting either replacement.
Yes. The pair includes bushings, inserts, washers and a preload-adjustment wrench, with four spring-preload positions. The separate 52484-292-000 joint rubbers and 90309-315-000 mounting nuts are not named in that included hardware list.
The joint rubber set supplies two for the corresponding left and right shock mounts. Each 90309-315-000 nut is supplied individually; two are required to renew the corresponding nuts on both shocks. Count the pieces needing replacement separately.
Send your model and year, plus photos of your existing part and any changes to the original setup.
Select your exact model and year to narrow your results.
Choose your model and year.