VintageCB750 Supplying CB Riders Since 2010

About Us Why Us? Reviews Shipping Info Returns Contact Us
Wish Lists
0 My Cart

Your cart is currently empty.

Browse all parts
Total (USD): $0.00
View cart
Menu
Search
Wish
Cart 0
My motorcycle Choose your Honda CB model

Search parts

Searching all Honda CB parts

Example: brake pads or oil filter.

1972 Honda CB500K Fork Seal Driver

The fork seal driver offered for the 1972 CB500K is a split installation tool for 35mm or 36mm applications. Confirm the forks fitted before selecting it. Its listed CB500K application is 35mm; the tool does not supply seals or complete the repair parts order.

Close ×
Your saved bike Choose your Honda CB model

Shop By Category

Most orders ship same or next business day Fitment guarantee Listed for your exact model and year? We’ll make it right if it doesn’t fit as described. Mechanic-backed support Ask our team for help choosing the right Honda CB part.
Currently viewing Fork & Suspension Tools

Honda motorcycle parts

Choose your model and year to see parts listed for your bike.

Honda CB750 CB650 CB550 CB500 35 36mm fork seal driver

Honda CB750 / CB650 / CB550 / CB500 35/36mm Fork Seal Driver

$49.95 USD
35-4299
Install 35mm or 36mm fork seals cleanly with this 35/36mm Fork Seal Driver. High-quality carbon steel with split design. Use for easy installation of...
compare

1972 Honda CB500K · Fork & Suspension Tools Buying guide

Match the installation tool to the fork being serviced

This carbon-steel split driver is described for installing seals on the stated fork sizes. Compare the actual installed diameter, especially after a fork swap, and keep replacement seals and hardware separate from the tool purchase.

Parts to consider

Honda CB750 / CB650 / CB550 / CB500 35/36mm Fork Seal Driver Split 35/36mm seal driverCarbon-steel installation tool for the stated 35mm or 36mm fork applications. Its CB500K application specifies 35mm forks; no replacement seals are included by implication.View part

Use the dimensional application rather than the model name alone

The driver lists 35mm forks for CB500K 1971–73 and also covers 36mm applications in its general description. If different forks have been installed, identify their specification before choosing the tool. A motorcycle year cannot establish the diameter of parts that a previous owner has replaced.

Buy repair parts independently of the driver

The tool description names a split carbon-steel driver, not replacement seals, O-rings or fork tubes. Determine the worn parts and follow the appropriate fork service information when planning the work. The driver’s application helps select a tool; it does not define every replacement part or procedure needed for that repair.

Choosing the right parts

What fork sizes does the driver cover?

It is specified for 35mm and 36mm fork seals. The CB500K appears under the 35mm application, so identify a swapped fork’s actual requirement before choosing the tool from the original motorcycle model.

Is the driver compatible with conventional and inverted forks?

Yes. Both layouts are listed when they use the driver’s compatible 35mm or 36mm seal application. Confirm that size on the fitted assembly; the conventional-or-inverted description does not extend compatibility to every fork diameter.

What does the split driver help prevent?

The tool applies installation force evenly around the seal to reduce cocking or damage. Its carbon-steel split design is intended for that controlled seal-installation job, providing a specific reason to choose it for the matching fork size.

Not sure which part you need?

Send your model and year, plus photos of your existing part and any changes to the original setup.

Ask a fitment question
Parts categories for 1972 Honda CB500K Four

Your cart

×