Honda motorcycle parts
Choose your model and year to see parts listed for your bike.
Choose your model and year to see parts listed for your bike.
1982 Honda CB900F Supersport · Fuel System Buying guide
Start at the tank and trace fuel delivery to the four VB-family carburetors, then inspect the engine-side holders and airbox boots. A fuel leak, restricted flow and an intake air leak can require different parts; identify the affected assembly before choosing a kit.
M20 x 1.0 fuel petcock1982 CB900F application, replacing reference 16950-MA4-771.View part
Automatic shut-off repair kitFor the listed 1982 shut-off assembly; one supplied O-ring may be unused.View part
Basic carburetor repair kitBowl gasket, float needle and O-rings; each kit services one carburetor.View part
Related parts: Four engine-side carb holders · Four airbox boots
Honda places the CB900F carburetor identification number on the left side of the carburetor body. Record it and inspect the fitted parts before ordering, especially after a carburetor swap. The original 32mm venturi specification is not the outside mounting diameter used to select a pod filter.
The M20 x 1.0 tank petcock and the automatic shut-off repair kit service different assemblies. The kit’s listing warns that one supplied O-ring may be unused on some versions. Match the original assembly and hose routing; do not fit a leftover seal in an unsupported position.
Locate the wet joint with the engine stopped and away from ignition sources. Tank valve, hose, float-bowl, drain-screw and connector-tube leaks use different parts. A carburetor kit does not repair a leaking tank connection or an intake rubber.
Read the identification number on the left side of the carburetor body and compare the existing seals, jets and connections. The motorcycle year cannot identify a swapped carburetor bank, and similar-looking kits can contain different metering parts.
No. It services the separate automatic fuel-control assembly on the listed 1982 application. Inspect its hoses and construction before ordering. The tank petcock has its own connection and service parts, and the shut-off kit may leave one application-dependent O-ring unused.
Send your model and year, plus photos of your existing part and any changes to the original setup.
Select your exact model and year to narrow your results.
Choose your model and year.