Honda motorcycle parts
Choose your model and year to see parts listed for your bike.
Choose your model and year to see parts listed for your bike.
1982 Honda CB900F Supersport · Gauges & Cables Buying guide
Stock-mount cap nuts and mechanical cables are service parts for one type of repair. Custom speedometers and tachometers require their own ratio and mounting plan, especially after changes to the cockpit or wheel drive.
Black speedometer cableJapanese-made cable referencing 44830-KB4-700 and 44830-356-010.View part
Stock instrument cap-nut setFour nuts referencing 94021-06020.View part
Custom 85mm MPH speedometerMechanical 2240:60 ratio with custom mounting required.View part
Related parts: 24-inch tachometer cable · 29-inch tachometer cable
The tachometer choices list 24-inch and 29-inch lengths for the CB900F. Compare the installed route and fittings rather than deciding from year alone. The speedometer cable has supported references but no length stated in the current description, which matters when the instrument position has changed.
Honda’s F instrument procedure separates the mechanical cables, mounting nuts and bulb holders. It warns against leaving the instruments upside down because internal oil can reach the lens. Inspect the supports and cable ends while the cluster is accessible; custom gauges still need an independent ratio, bracket and wiring plan.
Inspect the cable for damage, tight bends and poor engagement at both ends, then check the drive and instrument. A binding or worn cable can disturb the reading. Use the Honda cable-service guidance and isolate the fault before buying a custom gauge.
Follow the actual route from the drive to the instrument and compare both end fittings. The listed 24-inch and 29-inch options share model coverage, so year alone does not choose between them. Allow a smooth route without stretching or a tight loop.
Check that the correct bulb is seated and inspect its holder and wiring for loose connections, open circuits or shorts. Honda includes those checks in the F instrument procedure. A cable replacement will not repair an electrical lighting fault.
Send your model and year, plus photos of your existing part and any changes to the original setup.
Select your exact model and year to narrow your results.
Choose your model and year.