Honda motorcycle parts
Choose your model and year to see parts listed for your bike.
Choose your model and year to see parts listed for your bike.
1983 Honda CB1100F · Brake & Clutch Buying guide
Pads, caliper pistons and clutch plates are listed by size and per-bike quantity. Measure your old parts and check those figures, because similar-looking parts differ in thickness or diameter.
Front Kevlar pad set90 x 49 x 9mm pads replacing 45105-KN8-026; one set does one caliper.View part
Front master cylinder rebuild kitReplaces 45530-MA5-671 and lists the CB1100F with other 1981-83 DOHC models.View part
CB1100F clutch cableMade in Japan cable for the 1983 CB1100F, replacing 22870-MG5-406.View part
Related parts: Front caliper rebuild kit · Rear master cylinder kit · Clutch friction plate #1
Pads are listed in Kevlar and sintered metal. The front set replacing 45105-KN8-026 is 9mm thick, while the front and rear set replacing 45105-MA3-007 is 10.5mm. Compare thickness and OEM number with the pads you remove.
Front and rear master cylinder kits, caliper kits, pistons and bleed screws are listed separately. Old diaphragms and boots often harden, so inspect them while the system is open and follow the service manual for bleeding.
The 30.15mm piston replacing 45107-MA3-006 lists four per bike on the CB1100F. The 27mm piston with seals replacing 43107-MA3-006 lists two per bike. Measure yours before ordering.
No. The front pad listings say one set fits one caliper. Order a set for each front caliper you are servicing, and check the disc surface while the pads are out.
The black clutch lever replacing 53178-MA6-000 names the CB1100F and has a 10mm bolt hole. The brake levers are listed separately in black or chrome finishes.
Send your model and year, plus photos of your existing part and any changes to the original setup.
Select your exact model and year to narrow your results.
Choose your model and year.