Honda motorcycle parts
Choose your model and year to see parts listed for your bike.
Choose your model and year to see parts listed for your bike.
1971 Honda CB750K · Suspension & Wheel Buying guide
A familiar model name does not identify every component on a modified motorcycle. Compare fork dimensions, shock mounting style and wheel specifications before selecting parts, then follow the individual category links for the hardware that belongs to each assembly.
Early CB750K stock-design shocksBlack-center reproduction design listed at 336mm from eye center to clevis.View part
1971 application fork seal setJapanese-made seal set listed at 35 × 48 × 10.5 / 11mm; compare the fitted fork.View part
6302-2RS front wheel bearing6302-2RS bearing; the application calls for two per front wheel. Confirm the supplied quantity before ordering.View part
Related parts: 35mm replacement fork tube pair · Swingarm bronze bushing pair · Stock 18-inch rear spoke set
Fork diameter, seal dimensions and shock eye-to-clevis length describe different measurements. Use the values on the relevant product rather than applying a fork-tube diameter to a cap wrench or treating every short shock as a stock replacement. Custom mounts require their own comparison.
Spoke sets are listed as wheel-specific packs. Bearings and mounting hardware have separate listings; distinguish how many the motorcycle uses from how many the package supplies. Identify a changed rim or hub before relying on the original wheel application.
Length is only one check. Compare the upper and lower mounting style, dimensions and intended application. The category includes custom eye-to-eye shocks as well as eye-to-clevis types, so they are not all equivalent choices.
A model-year listing does not verify a converted rim or hub. Identify the fitted wheel dimensions and components, then compare the product’s stated wheel application before choosing spokes, bearings or seals.
The seal also has an outer diameter and height to match the fork housing. Compare the full 35 × 48 × 10.5 / 11mm specification for this offered set with the installed fork, particularly after a front-end swap.
Send your model and year, plus photos of your existing part and any changes to the original setup.
Select your exact model and year to narrow your results.
Choose your model and year.