Honda motorcycle parts
Choose your model and year to see parts listed for your bike.
Choose your model and year to see parts listed for your bike.
1970 Honda CB750K · Battery & Fuses Buying guide
A retaining band, mounting rubber and cable each have a different job and supplied quantity. Compare the battery dimensions and existing hardware first, then choose the individual supporting pieces that the service actually requires.
ATX14AHL sealed AGM batteryPre-charged 12V AGM battery, listed at 14Ah and 210 CCA; confirm the stated dimensions against your setup.View part
Stock-type battery retaining bandListed at 6.125 inches, or 155mm, measured from inside bracket to inside bracket.View part
Upper battery box mounting setOne rubber, collar, bolt and washer per set; the listing gives the number of sets used by model.View part
Related parts: Early fuse box assembly · Positive battery cable with covers · Negative battery ground cable
The AGM battery lists dimensions of 5.28 inches long, 3.54 inches wide and 6.54 inches high. Compare these with your actual battery box, band and terminal clearance. The listing asks buyers to confirm the size and specification, which matters on a motorcycle with modified mounting or connections.
Identify which mounting positions need attention and which collars, bolts and washers can be retained. Compare a complete mounting set with the individually sold rubbers before ordering replacement hardware for every position.
The band description gives 6.125 inches, or 155mm, from the inside of one bracket to the inside of the other. Compare that same measurement and your fitted arrangement rather than measuring unrelated outside edges of the old band.
Inspect the box for rust, enlarged mounting holes and missing cushions before choosing rubbers or hardware sets. The rubber listing calls for those checks because new cushions do not repair damaged metal. Confirm that the battery is supported securely without sharp-edge contact or pinched cables.
Check terminal orientation, cable reach and clearance above the terminals as well as the listed 5.28 × 3.54 × 6.54-inch size. The battery is a sealed, pre-charged AGM unit with no acid or water to add. Match the charging system to the battery requirements, especially if the bike has been converted to lithium-specific regulation.
Send your model and year, plus photos of your existing part and any changes to the original setup.
Select your exact model and year to narrow your results.
Choose your model and year.