VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1974 Honda CL360K0 Scrambler — pièces de moto

The supported stock-application choices in this 1974 Honda CL360K0 shock route are the joint-rubber set and OEM-type mounting nut. Compare the fitted shocks before ordering. The separate universal shorty-shock listings need a custom-installation assessment rather than an assumed original-fit recommendation.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Amortisseurs

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB1100 CB900 CB750 type shock absorber nut 90309-315-000

Honda CB OEM Type Shock Absorber Nut ~ Replaces 90309-315-000

$3.95 USD
49-0779
Replace your shock absorber nuts with this Shock Absorber Nut, a replica of the OEM type used when installing shocks. Replaces OEM #90309-315-000.Note: 2...
Honda CB1100 CB1000 shock absorber joint rubber set 2 52484-292-000

Honda CB Shock Absorber Joint Rubber Set/2 ~ Replaces 52484-292-000

$6.76 USD
73-0093
Replace your shock joint rubbers with this Shock Absorber Joint Rubber Set of 2, replacing OEM #52484-292-000.Key Features• Shock absorber joint rubbers• Set of...
Universal chrome shrouded 290mm shock absorber set side detail

Universal Motorcycle Shorty Shock Absorber Set ~ Chrome Shrouded 290mm

$119.95 USD
06-3591
Drop the back end with a clean all-chrome look using this Custom Shorty Shock Absorber Set. Chrome body and shroud with chrome progressive-wound springs,...
Universal black shrouded 290mm shorty motorcycle shock absorber set

Universal Motorcycle Shorty Shock Absorber Set ~ Black Shrouded 290mm

$129.95 USD
06-3590
Get the shortened look with a bit more coverage using this Custom Shorty Shock Absorber Set featuring a black body and shroud with black...
Épuisé
Universal black 290mm eye-to-eye shorty motorcycle shock absorber set

Universal Motorcycle Shorty Shock Absorber Set ~ Black Eye-to-Eye 290mm

$139.95 USD
06-3592
Go shorter with a different mounting configuration using this Custom Shorty Shock Absorber Set. Black body and shroud with black progressive-wound springs, 290mm (11...
Épuisé
Universal black 290mm shorty motorcycle shock absorber set

Universal Motorcycle Shorty Shock Absorber Set ~ Black 290mm

$139.95 USD
06-3589
Slam the back end with this Custom Shorty Shock Absorber Set, measuring 290mm (11 3/8") eye-to-clevis, noticeably shorter than stock for custom café, bobber,...
Comparer

1974 Honda CL360K0 · Shock Mounting Parts Buying guide

Inspect the mounts before selecting rubbers and nuts

The joint rubbers come as a set of two. The nut is an OEM-type replica with two used per motorcycle in its application note; keep that requirement distinct from the packaged rubber quantity.

Parts to consider

Honda CB Shock Absorber Joint Rubber Set/2 ~ Replaces 52484-292-000 Shock joint rubbers, set of twoTwo replacement rubbers referencing 52484-292-000.Voir la pièce Honda CB OEM Type Shock Absorber Nut ~ Replaces 90309-315-000 OEM-type shock mounting nutReplica nut referencing 90309-315-000; the application note specifies two per motorcycle.Voir la pièce

Order by the mounting pieces being renewed

Inspect the shock joints and fasteners independently. A two-piece rubber set addresses the rubbers, while the nut product carries its own application count. Keep the replacement references with the corresponding worn parts when preparing the order, particularly if only one side is being serviced.

Check custom shocks as complete installations

The universal 290mm options include eye-to-clevis and eye-to-eye designs with different bushing specifications. Their presence in the grid does not establish a stock CL360 fit. Confirm the actual mounting dimensions and the consequences of a length change before selecting a custom shock.

Common buying questions

Is the shock nut a genuine Honda part?

It is described as an OEM-type replica, with replacement reference 90309-315-000. Choose it on that basis; an OEM reference identifies the intended replacement and does not establish genuine Honda manufacture.

How should I count the shock nuts and rubber sets?

The nut’s application note specifies two nuts per motorcycle and asks you to order the required quantity. The joint rubbers come in a two-piece set. Count the positions being renewed rather than treating these as identical package sizes.

Can original-type rubbers be used on aftermarket shocks?

Check the aftermarket shock’s mounting dimensions and hardware requirements first. The CL360 application supports the listed replacement type, but it does not verify that a changed shock accepts the same rubber or fastening arrangement.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1974 Honda CL360K0

Votre panier

×