Pièces pour motos Honda
Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.
Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.
1969 Honda CL350K1 · Charging System Buying guide
Both charging kits include a stator and rectifier/regulator and are rated at approximately 150 watts. The separate Hot Shot units retain the stock stator. Battery chemistry decides which version belongs in either repair.
Lead-acid stator and regulator kitIncludes a stator and rectifier/regulator for standard lead-acid batteries. This version is not compatible with lithium-ion batteries.Voir la pièce
Lithium-ion stator and regulator kitIncludes a stator and lithium-ion rectifier/regulator with a 14 V ±0.2 V set point. Battery-manufacturer confirmation is required before purchase.Voir la pièce
Separate lead-acid rectifier/regulatorCombined rectifier/regulator intended for a standard lead-acid system. Check its application against the stator and connections fitted to the motorcycle.Voir la pièce
Pièces connexes : Separate lithium-ion rectifier/regulator · 16 × 1.5 rotor-removal tool
Use the test results to decide whether the stator belongs in the order. Each kit supplies a stator and regulator and is rated at approximately 150 watts, with a 55-watt headlight capability. A standalone Hot Shot unit is intended to work with the stock stator.
The lithium-ion kit and the linked lithium-ion rectifier/regulator specify a 14 V ±0.2 V set point. Give that figure to the battery manufacturer before purchase. A battery described simply as lithium does not by itself establish compatibility with a particular regulator or the rest of the charging system.
Each version includes a stator and a rectifier/regulator and is rated at approximately 150 watts. Choose lead-acid or lithium-ion to match the battery; check the installation instructions before planning any additional wiring or hardware.
No. The lithium-ion kit excludes standard lead-acid batteries, while the lead-acid kit excludes lithium-ion batteries. Select the version for the battery that will actually be installed and confirm the full application.
Check the planned service procedure to establish whether rotor removal is needed. The linked puller has a stated 16 × 1.5 thread; compare that specification with the fitted rotor before adding the tool.
Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.
Sélectionnez le modèle exact et l’année pour affiner les résultats.
Choisissez votre modèle et l’année.