VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1969 Honda CL350K1 Scrambler — pièces de moto

The ignition-coil choices for a 1969 Honda CL350K1 include different primary resistances. Before ordering, identify the ignition currently fitted and its coil specification, then compare mounting space and lead connections. A higher-output label alone does not establish electrical compatibility.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Allumage, contacteurs, bobines, bougies et rupteurs

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB500 CB450 CB350 CL350K0 CL350K1 ignition coil 30500-292-672

Honda CB Ignition Coil ~ Replaces 30500-292-672

$37.95 USD
17-6923
Replace your CB450/CL450, CB500T, or CB350/CL350/SL350 ignition coil with this Ignition Coil, replacing OEM #30500-292-672 / #30500-312-000 / #30500-286-004 / #30500-286-007 / #30500-310-670. 12V...
Honda CB360 CB350 CL350K0 performance high output single tower coil

Honda CB Performance High Output Single Tower Coil

$89.95 USD
17-6807
Upgrade your CB350 or CB360 ignition with this Performance Single Tower Ignition Coil. Single-tower high-output coil with 3.3 Ohm primary resistance and 70 kV...
Comparer

1969 Honda CL350K1 · Ignition Coils Buying guide

Match coil resistance before comparing the hardware

The 5 ohm and 3.3 ohm coils are separate choices, not interchangeable grades of the same part. Resolve the ignition requirement first, especially where an electronic conversion or replacement harness has been installed.

Parts to consider

Honda CB Ignition Coil ~ Replaces 30500-292-672 5 ohm coil with leads12 V single-output coil with approximately 80 mm mounting centers and a 19-inch spark-plug wire. Supplied with attached wires and sold individually.Voir la pièce Honda CB Performance High Output Single Tower Coil 3.3 ohm single-tower coilSingle-tower coil with a 3.3 ohm primary resistance. Confirm the installed ignition permits this resistance before considering it.Voir la pièce

Use the ignition instructions as the deciding check

The 3.3 ohm single-tower coil is offered for contact-point ignitions and electronic systems requiring a 3 ohm coil. Identify any electronic conversion and check its instructions before buying. The other option is a 5 ohm coil with attached leads; output labels do not replace this resistance check.

Check wire exits as well as mounting centers

When replacing a beige Honda coil, the 5 ohm replacement mounts in the opposite orientation because its wires leave differently. It has a blue lead with a dual female bullet connector and a black/white lead with a male bullet. Compare routing and clearance before installation.

Common buying questions

Can the 3.3 ohm coil replace the 5 ohm version?

Check the installed ignition first. The 3.3 ohm option is specified for points or electronic ignitions requiring a 3 ohm coil. An electronic conversion with a different resistance requirement needs a compatible coil selected from its own instructions.

Does one order of the 5 ohm coil include multiple coils?

The 5 ohm coil is sold individually with wires attached. Count the replacements needed for your repair and confirm the chosen part before setting the order quantity; do not interpret one item as a multi-coil kit.

Why might the replacement face the opposite way?

The 5 ohm replacement mounts backwards when replacing a beige Honda coil because its wires exit differently. Check the bracket, connector arrangement and lead reach in that orientation rather than forcing the old routing.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1969 Honda CL350K1

Votre panier

×