VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1976 Honda CB360T — Composants en caoutchouc

Tank, seat and side-cover rubbers should be matched by position rather than appearance alone. For the CB360T fuel tank, plan around the two front cushions and separate rear holder, then inspect the bodywork supports while access is clear.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Composants en caoutchouc

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB side stand rubber 50548-356-700

Honda CB Side Stand Rubber ~ Replaces 50548-356-700

$8.74 USD
02-6537
Take the rattle out of your side stand with this Side Stand Rubber Cushion, a direct replacement for OEM #50548-356-700. Fits a broad range...
Honda CB sidecover damper rubber b 83551-300-000

Honda CB Sidecover Damper Rubber B ~ Replaces 83551-300-000

$2.54 USD
02-6531
Keep your sidecovers snug and rattle-free with this Rubber Sidecover Damper B, a direct replacement for OEM #83551-300-000. Fits an exceptionally broad range of...
Nouveau
Honda CB550 CB500 CB360 rear fuel tank holder rubber 17613-286-000

Honda CB Rear Fuel Tank Holder Rubber ~ Replaces 17613-286-000

$9.95 USD
12-0133
Restore proper rear fuel tank mounting on your mid-'70s twin or four with this Rear Fuel Tank Holder Rubber, a direct replacement for OEM...
Nouveau
Honda CB side cover headlight stay rubber grommet 17245-369-000

Honda CB Side Cover / Headlight Stay Rubber Grommet ~ Replaces 17245-369-000

$3.50 USD
03-0785
Replace worn or cracked grommets with this Side Cover Rubber / Headlight Stay Grommet, a direct replacement for OEM #17245-369-000. Fits the CB400F Supersport...
Nouveau
Honda CB350F CB400F CB360 CB500T CB550 side cover rubber 83621-333-000

Honda CB Side Cover Rubber ~ Replaces 83621-333-000

$3.50 USD
01-8999
Restore the fit and feel of your side covers with this Side Cover Rubber, a replacement for OEM #83621-333-000. A multi-application rubber used to...
Honda CB750 CB650 CB550 CB500 seat setting rubber 77204-312-000

Honda CB Genuine Honda Seat Setting Rubber ~ OEM 77204-312-000

$13.95 USD
99-5052
Upgrade or restore your classic Honda motorcycle with this Genuine Honda Seat Setting Rubber — precision‑engineered and quality made in Japan. This authentic replacement...
Honda CB front fuel tank rubber cushion 17611-KE8-000

Front Fuel Tank Rubber Cushion ~ Replaces Honda OEM 17611-KE8-000

$5.50 USD
27-5520
This aftermarket front fuel tank rubber cushion replaces Honda OEM 17611-KE8-000 on the listed Honda CB-series applications. It mounts to the frame and supports...
Nouveau
Honda CB700 CB650 CB550 fuel tank front rubber cushion 17611-KE8-000

Honda CB Genuine Honda 17611-KE8-000 Fuel Tank Front Rubber Cushion ~ Replaces 17611-KE8-000

$17.95 USD
99-5145
This genuine Honda front fuel tank rubber cushion mounts to the frame and supports the front of the gas tank on select classic Honda...
Comparer

1976 Honda CB360T · Mounting Rubbers Buying guide

Match each rubber to the mounting point

The range covers several different supports. Genuine and aftermarket front tank cushions provide a choice for the same position, while the rear holder, seat setting rubber and side-cover grommets serve their own mounting points.

Parts to consider

Honda CB Genuine Honda 17611-KE8-000 Fuel Tank Front Rubber Cushion ~ Replaces 17611-KE8-000 Genuine Honda front tank cushionHonda 17611-KE8-000 cushion superseding 17611-286-000. Sold individually for the front tank mounts.Voir la pièce Honda CB Rear Fuel Tank Holder Rubber ~ Replaces 17613-286-000 Rear tank holder rubberReplacement rear fuel-tank support referenced to Honda 17613-286-000.Voir la pièce Honda CB Genuine Honda Seat Setting Rubber ~ OEM 77204-312-000 Genuine Honda seat setting rubberGenuine Honda 77204-312-000 seat support, sold individually.Voir la pièce

Pièces connexes : Aftermarket front tank cushion · Side-cover mounting grommet · Side-cover support rubber

Choose the front tank cushion by origin

The featured front cushion is genuine Honda; the linked alternative is an aftermarket replacement for the same listed reference. Both are sold individually. The original tank uses two front cushions, so decide whether one damaged piece or both mounting positions need attention.

Inspect the complete mounting arrangement

A rear tank holder, seat rubber and side-cover support cannot be chosen by a shared model tag alone. Compare their shapes and attachment points with the parts removed. If a tank or seat has been changed, check the modified supports before relying on the original mounting layout.

Buying questions

What is the difference between the two front tank cushions?

One is sold as genuine Honda and the linked alternative is aftermarket. Both are listed for the CB360T and supplied individually. Choose by the part origin you prefer, after checking the tank and frame mounting shape.

Which mounting rubbers does the original fuel tank use?

The original tank has two front cushion positions and a separate rear holder. Choose the rear holder product for that mounting point. Inspect all supports while the tank is removed so the order covers the actual worn parts.

How many side-cover rubbers are needed for 1976?

Each original side cover uses one linked mounting grommet and two linked support rubbers. These are individually supplied products. For both covers, that is two grommets and four support rubbers, subject to checking any altered bodywork.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1976 Honda CB360T

Votre panier

×