1974 Honda CB360K0 Fork Seals & Dust Boots

Préciser la sous-catégorie

Consultation en cours Tubes, ressorts, joints et soufflets de fourche

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Trier par

Honda CB750 CB550 CB500 CB450 CB400 reflector 33741-340-670

Honda CB Stock Type Reflector ~ Replaces 33741-340-670

$21.46 USD

Restore your mid-'70s Honda's stock reflectors with this Stock-Type Screw-On Reflector with a 6mm thread, replacing OEM #33741-340-670. Broad fitment covering the 1972-78 CB750...

Honda CB450 / CB400 / CB360 Fork Seals

$21.95 USD

Replace your CB400 or CB360 fork seals with this Fork Seal Set, 33 x 46 x 11mm. Made in Japan by OEM supplier.Key Features•...

Honda CB450 CB400 CB360 CL360K0 fork dust boot set 91254-413-881

Honda CB Fork Dust Boot Set ~ Replaces 91254-413-881

$15.95 USD

Refresh your fork seal dust boots with this Fork Seal Dust Boots Set of 2. 33mm size. Replaces OEM #91254-413-881.Key Features• Fork seal dust...

Honda CB1100 CB1000 CB900 CB750 16mm clutch oil filter rotor lock nut 90231-KCS-651

Honda CB 16mm Clutch / Oil Filter Rotor Lock Nut ~ Genuine Honda 90231-KCS-651 ~ Replaces 90231-KCS-651

$10.95 USD

This genuine Honda 16mm lock nut is used on compatible Honda CB clutch basket and oil filter rotor assemblies. It is a small hardware...

Honda CB400 CB360 CB200 CB175 fork tube cap bolt with o-ring 94605-27101

Honda CB400 / CB360 / CB200 / CB175 Fork Tube Cap Bolt with O-Ring ~ Replaces Honda OEM 9461

$17.95 USD

This aftermarket fork tube cap bolt with matching O-ring replaces Honda OEM #94605-27101 on compatible Honda CB front forks. It threads into the top...

Comparer

1974 Honda CB360K0 · Fork Seals & Dust Boots Buying guide

Choose oil seals and dust protection separately

The oil-seal pair measures 33 × 46 × 11mm, while the dust boots are a separate two-piece 33mm set. Inspect the tubes and old components before deciding which sealing parts need renewal.

Parts to consider

Fork oil-seal pairFork seals measuring 33 × 46 × 11mm, made in Japan.Voir la pièce

Honda CB Fork Dust Boot Set ~ Replaces 91254-413-881

Fork dust-boot pairTwo 33mm dust boots, cross-referenced to Honda 91254-413-881.Voir la pièce

Pièces connexes : Fork top cap with O-ring

Renew the correct sealing parts

Oil seals and dust boots have different jobs and are separate purchases. The oil-seal set contains two seals; the boot set contains two dust boots. Inspect both sides and the tube surfaces while planning the repair, using the manual for assembly and oil specifications.

Check the cap as its own item

The linked aftermarket top cap includes an O-ring and is sold individually. Its stated thread is 27 × 1.0mm. Compare the existing cap and fork before ordering for a changed front end; undamaged caps may only need appropriate replacement sealing rings.

Common buying questions

Do the oil seals include the dust boots?

They are separate products. The oil-seal selection is a pair of 33 × 46 × 11mm seals; the dust-boot selection is a pair of 33mm boots. Order both only if both need replacement.

How many top caps come with one order?

The linked fork top cap is sold individually and includes its O-ring. The original fork uses two caps, so order two only when replacing both rather than one damaged cap.

Will the seal set fit a substituted fork?

Measure and identify the fitted fork first. The CB360K application does not establish compatibility for another fork assembly; compare the old seal dimensions and dust-boot mounting before placing the order.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité

Catégories de pièces pour 1974 Honda CB360K0

Aide et renseignements

Sélectionnez votre moto

Rechercher des pièces

Magasiner par catégorie