Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

Consultation en cours Contacteurs et capteurs

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB Rear Brake Light Switch

$10.33 USD
12-0008
Replace your rear brake light switch with this Rear Brake Light Stop Switch. Exceptionally broad fitment across the SOHC CB750 lineup and virtually the...

Honda CB Hydraulic Stop Light Switch ~ Replaces 35350-300-006

$24.95 USD
29-7021
Replace your hydraulic brake light switch with this Hydraulic Brake Light / Stop Switch, replacing OEM #35350-300-006 / #35350-300-016. 10mm x M1.25 thread.Key Features•...

Honda CB Front Brake Light Switch Sub Harness ~ Replaces 35345-319-000

$7.00 USD
73-0104
Replace your front stop switch sub harness with this Front Stop / Brake Switch Sub Harness, replacing OEM #35345-319-000.Key Features• Front stop / brake...

1973 Honda CB350G · Brake-Light Switches Buying guide

Distinguish the two brake-light switch circuits

Front brake hydraulics, the rear switch and the connecting wiring need separate checks. Match the replacement to its actual location and retain the correct wiring arrangement during any brake or control changes.

Choose the switch for the correct brake

The hydraulic switch is the front-brake choice and has an M10 × 1.25 thread. The rear stop switch is a separate application. Changed master cylinders and brake plumbing can alter what is required, so inspect the actual setup before buying.

Do not overlook the short wiring section

The front stop-switch sub-harness is separately available when its leads or connectors need renewal. Check the adjoining harness and switch terminals as part of diagnosis. Replacing a switch alone will not repair a damaged connection elsewhere in the circuit.

Buying questions

Will the front switch suit a replacement master cylinder?

Identify where the replacement brake system operates its stop-light switch. The offered hydraulic switch uses M10 × 1.25 threads; confirm the port and wiring arrangement rather than assuming every master cylinder uses this switch.

What thread does the front hydraulic switch use?

The offered switch is M10 × 1.25. Compare that thread with the fitted port before ordering, particularly after a master-cylinder or brake-line conversion.

Does the sub-harness include a brake-light switch?

It is the separate wiring section for the front stop switch. Choose the switch as its own item when diagnosis shows both the switch and wiring need replacement.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité

Votre panier

×