VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1973 Honda CB350G — Jantes, rayons, joints de roue et valves

The CB350G wheel selection includes a front bearing retainer, a front retainer O-ring and a separate rear bearing-retainer tool. Identify which hub you are servicing first. The motorcycle’s disc front wheel and drum rear wheel must not be confused.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Jantes, rayons, joints de roue et valves

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Nouveau
Honda CB900 CB750 CB650 front wheel bearing retainer 44643-300-000

Honda CB Front Wheel Bearing Retainer ~ Replaces 44643-300-000

$16.95 USD
28-4016
Replace your front wheel bearing retainer with this Front Wheel Bearing Retainer, replacing OEM #44643-300-000. Exceptionally broad fitment across the SOHC and DOHC CB750...
Nouveau
Honda CB900 CB750 CB400 rear wheel bearing removal tool 41231-286-000

Honda CB Rear Wheel Bearing Removal Tool ~ Removes retainer OEM 41231-286-000 / 41231-429-000

$21.95 USD
35-9129
Remove stubborn rear wheel bearing retainers safely with this Rear Wheel Bearing Removal Tool, designed specifically for Honda locking rings. This tool is built...
Nouveau
Honda CB900 CB750 CB400 rear wheel bearing retainer 41231-286-000

Honda CB Rear Wheel Bearing Retainer ~ Replaces 41231-286-000

$31.95 USD
73-1068
Secure your rear wheel bearing properly with this Rear Wheel Bearing Retainer – Brake Disc Side, designed as a direct replacement for the original...
Nouveau
Honda CB front wheel gear box retainer o-ring 91307-MB0-003

Honda CB Front Wheel / Gear Box Retainer O-Ring ~ Replaces 91307-MB0-003

$4.50 USD
03-0783
Seal your front wheel or gearbox retainer correctly with this Front Wheel / Gear Box Retainer O-Ring, size 54 x 2, replacing OEM #91307-MB0-003...
Comparer

1973 Honda CB350G · Wheel Retainers & Seals Buying guide

Choose for the front hub or rear retainer

Retaining rings, sealing O-rings and removal tools have different roles. Use the hub position and replacement reference together, then choose the tool for the ring actually being serviced rather than its general wheel-tool label.

Parts to consider

Honda CB Front Wheel Bearing Retainer ~ Replaces 44643-300-000 Front bearing retainerFront wheel bearing retaining ring replacing reference 44643-300-000.Voir la pièce Honda CB Front Wheel / Gear Box Retainer O-Ring ~ Replaces 91307-MB0-003 Front retainer O-ring54 × 2 O-ring for the front wheel/gearbox retainer; references include 91302-317-700.Voir la pièce Honda CB Rear Wheel Bearing Removal Tool ~ Removes retainer OEM 41231-286-000 / 41231-429-000 Rear retainer removal toolFor retainers corresponding to 41231-286-000 or 41231-429-000; 22 mm hex and 3/8-inch square drive.Voir la pièce

Keep front wheel parts together

The front bearing retainer corresponds to 44643-300-000. The separate 54 × 2 O-ring includes 91302-317-700 among its replacement references. Check both the ring and sealing position during front hub work, without treating either product as a bearing kit.

Choose the rear tool by ring reference

The rear retainer tool supports rings corresponding to 41231-286-000 or 41231-429-000 and offers a 22 mm hex plus a 3/8-inch square drive. Identify the fitted hub and ring before selecting the tool, then use the appropriate wheel-service procedure.

Buying questions

Will these front retainer parts fit a replacement wheel?

Identify the hub fitted to the motorcycle and compare its retainer reference and sealing arrangement. The front ring references 44643-300-000; check the separate 54 × 2 O-ring against that hub rather than the frame year alone.

Can the rear retainer tool remove the front ring?

Only rear retainer references 41231-286-000 and 41231-429-000 are supported by this tool description. The front ring has a different reference; establish the proper front tool independently.

What size is the front retainer O-ring?

The O-ring is specified as 54 × 2. Compare its listed replacement references and the sealing position on the original front wheel assembly, particularly if the motorcycle has a swapped wheel.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1973 Honda CB350G

Votre panier

×