VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1976 Honda CB400F — Guidon et commandes

Three different parts sit here: a chrome stock-type bar, a set of two upper clamps, and closed-end grips. All three are for a 7/8 inch bar and name the 1975-77 CB400F. They do not come as one kit.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Guidon et commandes

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Type closed-end grips 95011-14100

Honda OEM Type Closed-End Grips ~ Replaces 95011-14100

$16.95 USD
02-2424
Fit the correct grips on your earliest-era Honda with these Honda OEM-Type Rubber Grips. Accurate replicas of the factory grips fitted to the oldest...
Honda CB750 CB550 black handlebar clamp set 2 7 8 in. 95014-22200

Honda CB Black Handlebar Clamp Set/2 ~ 7/8 in. ~ Replaces 95014-22200

$32.95 USD
73-1120
Secure your handlebars with confidence using this Black Handlebar Clamp Set. Designed for 7/8" bars, these clamps replicate the stock look and function while...
Honda CB400F CB350F handlebar stock type CB400F 1975-76 53100-377-000

1972-77 Honda CB400F / CB350F Handlebar ~ Stock Type ~ CB400F 1975-76 ~ Replaces 53100-377-000

$69.95 USD
73-1101
Replace your CB400F handlebar with this Stock Type Handlebar for the CB400F (1975-76), Chrome. The holes are pre-cut for routing the wiring from the...
Comparer

1976 Honda CB400F · Handlebar Buying guide

Bar, clamps, and grips are separate

Measure the old bar before you trust a stock-type replacement. The printed length is 27 1/4 inches, and bars get measured in more than one way.

Parts to consider

1972-77 Honda CB400F / CB350F Handlebar ~ Stock Type ~ CB400F 1975-76 ~ Replaces 53100-377-000 Drilled stock-type barChrome bar replacing 53100-377-000. The title names CB400F 1975-76 and also the 1972-77 CB400F and CB350F. Diameter 7/8 inch, length 27 1/4 inches, pull-back 3 1/2 inches. Switch wire holes and switch-pin holes are drilled.Voir la pièce Honda CB Black Handlebar Clamp Set/2 ~ 7/8 in. ~ Replaces 95014-22200 Clamp set for 7/8 inch barsA set of two black clamps for the upper triple, replacing 95014-22200. Fitment names the 1975-77 CB400F. It is not a handlebar and it does not include an end plug.Voir la pièce Honda OEM Type Closed-End Grips ~ Replaces 95011-14100 Closed-end gripsBlack closed-end rubber, 130mm, for 7/8 inch bars, replacing 95011-14100 and 95011-14200. Fitment names the 1975-77 CB400F. Pair versus each is not stated.Voir la pièce

Read the year line on the bar

The handlebar title says stock type for CB400F 1975-76 and also covers the 1972-77 CB400F and CB350F. That is one bar, not two shapes. Compare 27 1/4 inch length, 3 1/2 inch pull-back, and 2 1/4 inch inner rise with the bar you are removing. The product also says bars can be measured in different ways.

Two Honda grip numbers are not a pair count

95011-14100 and 95011-14200 are the numbers these grips replace. The description still does not say whether one purchase is a pair or a single grip. Check the quantity on the product. The clamps are clearer: the title says a set of two.

Handlebar questions

Does the bar include switches?

No. It is drilled so switch wires can pass through, and drilled for the pins that keep stock switches from rotating. The switches themselves are separate.

What size are the clamps?

A set of two for 7/8 inch bars, replacing 95014-22200, for the upper triple. Fitment includes the 1975-77 CB400F.

Do the grips come as a pair?

Pair versus each is not stated. They are black, closed-end, 130mm, for 7/8 inch bars. Check the quantity on the product.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1976 Honda CB400F

Votre panier

×