VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1969 Honda CL450K2 Scrambler — pièces de moto

Tank service on a 1969 Honda CL450K2 involves several distinct connections: the cap at the filler neck, the petcock at the outlet and the rubbers supporting the tank. Check the fitted tank before choosing replacement pieces, especially after a tank swap.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Réservoirs, bouchons, robinets et pièces

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB rear fuel tank holder rubber 17613-292-000

Honda CB Rear Fuel Tank Holder Rubber ~ Replaces 17613-292-000

$14.95 USD
02-6535
Secure your fuel tank at the rear with this Rear Fuel Tank Holder Rubber, a direct replacement for OEM #17613-292-000. One used per bike,...
Honda CB front fuel tank holder rubber 17611-283-010

Honda CB Front Fuel Tank Holder Rubber ~ Replaces 17611-283-010

$7.87 USD
02-6534
Secure the front of your fuel tank with this Front Fuel Tank Holder Rubber, a direct replacement for OEM #17611-283-010. Fits a broad range...
Honda CB750 CB550 CB450 CB400 CB350 gas cap rubber seal 17631-329-003

Honda CB Gas Cap Rubber Seal ~ Replaces 17631-329-003

$7.95 USD
20-0097
Replace the broad-fitment gas cap rubber seal on many classic Hondas with this Gas Cap Rubber Seal, replacing OEM #17631-329-003. Exceptionally wide fitment covering...
Honda CB450 CB360 CB350 CL350K0 CL350K2 fuel petcock 16950-292-000

Honda CB Fuel Petcock ~ Replaces 16950-292-000

$34.95 USD
29-0542
Replace your CB450, CL450, CB350, or CB360 fuel petcock with this Fuel Petcock, replacing OEM #16950-292-000 with M16 x 1.5 threads. Please verify the...
Nouveau
Honda CB450 CL450 CB350 CB72 gas tank filler cap 17620-402-000

Honda Gas Tank Filler Cap ~ Replaces 17620-402-000

$7.95 USD
07-4647
Restore an early-era Honda with this Chrome Gas Tank Filler Cap (with gasket installed), replacing OEM #17620-402-000 / #17620-402-010. Fits the oldest models in...
Comparer

1969 Honda CL450K2 · Tank Caps & Petcocks Buying guide

Identify the tank’s fittings before selecting hardware

The chrome cap includes an installed gasket, and the petcock uses an M16 × 1.5 connection. Front and rear tank supports have separate references and should be compared to their own mounting points.

Parts to consider

Honda Gas Tank Filler Cap ~ Replaces 17620-402-000 Chrome tank filler capChrome filler cap supplied with its gasket installed; replacement references 17620-402-000 and 17620-402-010.Voir la pièce Honda CB Fuel Petcock ~ Replaces 16950-292-000 Threaded fuel petcockFuel petcock with an M16 × 1.5 connection and replacement reference 16950-292-000. Measure the installed tank fitting.Voir la pièce Honda CB Gas Cap Rubber Seal ~ Replaces 17631-329-003 Fuel-cap rubber sealSeparate rubber seal with replacement reference 17631-329-003. Compare the seal seat in the existing cap.Voir la pièce

Pièces connexes : Front tank cushion · Rear tank cushion

Choose between a complete cap and a seal repair

The chrome cap arrives with its gasket installed; the separate rubber seal is a different purchasing choice. Inspect the existing cap and its seal seat before deciding which repair is appropriate. Do not assume the separately listed seal belongs to every replacement cap.

Account for the tank supports independently

The linked front cushion is sold individually; the listed arrangement uses two. One rear tank-holder rubber is specified per bike. Match front reference 17611-283-010 and rear reference 17613-292-000 to their own mounting positions, especially if the tank or supports have changed.

Ordering questions

Will this tap fit an aftermarket tank outlet?

Only a matching connection establishes the first fitment check. Verify M16 × 1.5 threads, then compare the outlet arrangement and available clearance against the replacement petcock before ordering.

Do I need the separate cap seal with a new chrome cap?

The chrome cap already has its gasket installed. The separate seal is useful only when it matches the cap being serviced; compare the existing cap’s seal seat before selecting it.

Are the front tank rubbers supplied as a pair?

The linked front cushion is sold individually. Two are specified for the listed arrangement, while the rear support uses a different rubber. Count and compare the actual support positions before ordering.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1969 Honda CL450K2

Votre panier

×