VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1969 Honda CL450K2 Scrambler — pièces de moto

Fuel-system work on a 1969 Honda CL450K2 can start at the tank or at the carburetors. Identify the source of the repair first: the petcock connection, filler-cap arrangement and carburetor model each require a different check before ordering parts.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Alimentation en carburant

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB rear fuel tank holder rubber 17613-292-000

Honda CB Rear Fuel Tank Holder Rubber ~ Replaces 17613-292-000

$14.95 USD
02-6535
Secure your fuel tank at the rear with this Rear Fuel Tank Holder Rubber, a direct replacement for OEM #17613-292-000. One used per bike,...
Honda CB front fuel tank holder rubber 17611-283-010

Honda CB Front Fuel Tank Holder Rubber ~ Replaces 17611-283-010

$7.87 USD
02-6534
Secure the front of your fuel tank with this Front Fuel Tank Holder Rubber, a direct replacement for OEM #17611-283-010. Fits a broad range...
Honda CB750 CB500 CB450 CB125 CB100 float valve 16011-302-004

Honda CB Float Valve ~ Replaces 16011-302-004

$9.95 USD
48-5009
Replace your float needle and seat with this Float Valve Set (needle and seat), replacing OEM #16011-302-004 / #16011-375-004.Key Features• Float valve set (needle...
Honda CB750 CB550 CB450 CB400 CB350 gas cap rubber seal 17631-329-003

Honda CB Gas Cap Rubber Seal ~ Replaces 17631-329-003

$7.95 USD
20-0097
Replace the broad-fitment gas cap rubber seal on many classic Hondas with this Gas Cap Rubber Seal, replacing OEM #17631-329-003. Exceptionally wide fitment covering...
Honda CB450 CB360 CB350 CL350K0 CL350K2 fuel petcock 16950-292-000

Honda CB Fuel Petcock ~ Replaces 16950-292-000

$34.95 USD
29-0542
Replace your CB450, CL450, CB350, or CB360 fuel petcock with this Fuel Petcock, replacing OEM #16950-292-000 with M16 x 1.5 threads. Please verify the...
Honda CB750 CB450 CB350 CB200 CB175 front cable clip 45465-270-000

Honda CB Front Cable Clip ~ Replaces 45465-270-000

$7.00 USD
73-1116
Keep your wiring clean and secure with this Front Cable Clip, designed to hold the stop switch wires neatly against the front cable. Replaces...
Nouveau
Honda CB450 CL450 CB350 CB72 gas tank filler cap 17620-402-000

Honda Gas Tank Filler Cap ~ Replaces 17620-402-000

$7.95 USD
07-4647
Restore an early-era Honda with this Chrome Gas Tank Filler Cap (with gasket installed), replacing OEM #17620-402-000 / #17620-402-010. Fits the oldest models in...
Honda CB500 CB450 CL450K0 CL450K2 CL450K3 carb float 16013-283-004

Honda CB Carb Float ~ Replaces 16013-283-004

$17.95 USD
20-6512
Replace your CB500T or CB450/CL450 carb float with this Carb Float with Pin, replacing OEM #16013-283-004.Sold each, order the quantity your bike requires.Key Features•...
Nouveau
Honda CB450K CL450K carb rebuild kit

1968-71 Honda CB450K / CL450K Carb Rebuild Kit

$19.95 USD
48-1395
Rebuild your early 5-speed CB450 or CL450 carbs with this Carb Rebuild Kit, designed for carburetor models 14H and 14L used on 5-speed 450s.There...
Honda CB450 CL450K0 CL450K2 CL450K3 CL450K4 carb holder 16211-283-000

Honda CB Carb Holder ~ Replaces 16211-283-000

$23.95 USD
48-1475
Replace a single CB450 or CL450 carb holder with gasket using this Carb Holder with Gasket, replacing OEM #16211-283-000.Note: this is for one holder....
Comparer

1969 Honda CL450K2 · Fuel System Buying guide

Work from the tank connection to the carburetor identity

The threaded petcock and gasket-equipped cap address tank service. Use the carburetor subcategories for model-specific rebuild, float and holder choices rather than treating all fuel-system products as interchangeable components.

Parts to consider

Honda CB Fuel Petcock ~ Replaces 16950-292-000 Threaded fuel petcockFuel petcock with an M16 × 1.5 connection and replacement reference 16950-292-000. Measure the installed tank fitting.Voir la pièce Honda Gas Tank Filler Cap ~ Replaces 17620-402-000 Chrome tank filler capChrome filler cap supplied with its gasket installed; replacement references 17620-402-000 and 17620-402-010.Voir la pièce

Identify the tank parts independently

The petcock has an M16 × 1.5 connection. The chrome filler cap has its gasket installed. Those details answer different ordering questions: verify the tank outlet before selecting the tap, and compare the cap attachment and filler opening before selecting the cap.

Do not let the frame year identify replacement carburetors

The rebuild kit is for 14H and 14L carburetors and services one carburetor per kit. The float is supplied individually with its pin. Each holder includes a gasket; two holders are used in the listed arrangement, with band clamps selected separately.

Ordering questions

Will the petcock fit a replacement tank?

Confirm that the replacement tank uses the specified M16 × 1.5 connection, then compare outlet orientation and surrounding clearance. A tank swap can change the required fitting despite the motorcycle’s original model.

Should I buy a separate gasket with the chrome cap?

The chrome filler cap is supplied with its gasket installed. Inspect the cap already fitted before ordering a separate seal, and verify any proposed replacement seal against that cap’s seating arrangement.

Does the carburetor kit service every carb on the motorcycle?

One kit services one carburetor and is specified for models 14H and 14L. Identify each installed carburetor and count the units being rebuilt before deciding how many kits to order.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1969 Honda CL450K2

Votre panier

×