VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1986 Honda CB450SC Nighthawk — Composants en caoutchouc

The rubber support choices for the 1986 Honda CB450SC Nighthawk cover the retracted side-stand stop, battery area, seat base and sidecovers. Each location has its own reference. One stand cushion is used at the compatible stand stop, while the other body listings do not publish a CB450SC-wide count of their individual supports.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Composants en caoutchouc

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB side stand rubber 50548-356-700

Honda CB Side Stand Rubber ~ Replaces 50548-356-700

$8.74 USD
02-6537
Take the rattle out of your side stand with this Side Stand Rubber Cushion, a direct replacement for OEM #50548-356-700. Fits a broad range...
Honda CB sidecover damper rubber b 83551-300-000

Honda CB Sidecover Damper Rubber B ~ Replaces 83551-300-000

$2.54 USD
02-6531
Keep your sidecovers snug and rattle-free with this Rubber Sidecover Damper B, a direct replacement for OEM #83551-300-000. Fits an exceptionally broad range of...
Honda CB seat rubber b 77205-286-000

Honda CB Seat Rubber B ~ Replaces 77205-286-000

$7.87 USD
02-6533
Replace those worn, dried-out seat rubbers under your classic Honda with this Seat Setting Rubber "B", a direct replacement for OEM #77205-286-000. One of...
Honda CB sidecover damper rubber a 17247-303-000

Honda CB Sidecover Damper Rubber A ~ Replaces 17247-303-000

$2.54 USD
02-6532
Complete your sidecover damper refresh with this Rubber Sidecover Damper A, a direct replacement for OEM #17247-303-000. This is one of the 3 different...
Nouveau
Honda CB750 CB650 CB550 CB500 battery box rubber 83618-323-000

Honda CB Battery Box Rubber ~ Replaces 83618-323-000

$4.95 USD
99-4986
Upgrade or restore your vintage Honda motorcycle with this Battery Box Rubber — designed to replace OEM #83618‑323‑000 and cushion your battery from vibration...
Comparer

1986 Honda CB450SC Nighthawk · Stand Stop and Body Supports Buying guide

Let the location and retained assembly determine the rubber order

The stand cushion identifies 50548-356-700 and the battery cushion 83618-323-000. Seat B uses 77205-286-000. Cover A and B use 17247-303-000 and 83551-300-000. Keep those references with their mounting locations; similar material does not define a common kit or a shared total.

Parts to consider

Honda CB Side Stand Rubber ~ Replaces 50548-356-700 50548-356-700 retracted-stand cushionRubber for the compatible stand-stop contact point; one used per side stand.Voir la pièce Honda CB Battery Box Rubber ~ Replaces 83618-323-000 83618-323-000 battery cushioning pieceOne rubber supplied, with surrounding battery-support inspection relevant to the repair.Voir la pièce Honda CB Seat Rubber B ~ Replaces 77205-286-000 77205-286-000 seat B cushionSingle setting rubber for a matching B point between seat base and frame.Voir la pièce

Pièces connexes : Single cover A support rubber · Single cover B support rubber

Check the stop design when the stand has been changed

The stand listing warns that the broad Honda CB range uses more than one stop design. Confirm 50548-356-700 and the actual retracted contact point on a changed stand. Model coverage does not establish every prior owner’s stand or stop arrangement.

Inspect surrounding battery pieces rather than counting from the photo

The battery-box cushion is one supplied rubber. Its guidance also names the tray, battery case, hold-down band and nearby wiring for inspection. Use the actual matching support locations and those findings to define the work; photograph views do not supply an unstated motorcycle count.

Common questions

What should be confirmed if earlier work changed the side stand or its stop?

Check that the fitted retracted-stop arrangement requires 50548-356-700 and the stated application. The listing warns that Honda CB stand-stop designs vary. One rubber is used on the compatible stand; confirm that arrangement before applying its count to substituted hardware.

Which surrounding items belong in the assessment of a hardened battery cushion?

Inspect the battery tray, battery case, hold-down band and nearby wiring for damage as part of the support assessment. The 83618-323-000 item supplies one rubber. Those findings establish the wider repair need without assuming a complete battery-support quantity from this listing.

How can a mixed seat-and-cover rubber order avoid another Honda’s quantity assumptions?

List each confirmed location with its reference: seat B 77205-286-000, cover A 17247-303-000 or cover B 83551-300-000. These are individual products with no stated CB450SC totals. Count their required positions rather than combining other-model table quantities into a body kit.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1986 Honda CB450SC Nighthawk

Votre panier

×