VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1986 Honda CB450SC Nighthawk — Guidon et commandes

Before replacing the grips on a 1986 CB450SC Nighthawk, compare the fitted handlebar and controls with the offered specifications. The two rubber designs share their size and replacement references. Your end hardware and the confirmed order contents determine which choice makes sense.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Guidon et commandes

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB type closed-end grips 53165-390-780

Honda OEM Type Closed-End Grips ~ Replaces 53165-390-780

$16.95 USD
02-2422
Keep your classic Honda looking factory-correct with these Honda OEM-Type Rubber Grips. Faithful replicas of the original grips fitted at the factory, in black...
Honda CB type open-end grips 53165-390-780

Honda OEM Type Open-End Grips ~ Replaces 53165-390-780

$19.95 USD
02-2481
Get factory-correct grip fit with the option to finish the bars your way, these Honda OEM-Type Rubber Grips are open-end replicas of the original...
Comparer

1986 Honda CB450SC Nighthawk · Handlebar Buying guide

Compare the fitted assembly with the replacement specification

The usable choices are black rubber OEM-type replicas measuring 130mm long for 7/8-inch handlebars. Both replace Honda references 53165-390-780 and 53166-390-780. Choose the closed-end finish or the open-end design with included plugs after checking the arrangement actually fitted to the motorcycle.

Parts to consider

Honda OEM Type Closed-End Grips ~ Replaces 53165-390-780 Closed-end rubber replacement gripsOEM-type replicas specified at 130mm length for 7/8-inch handlebars. Their closed ends suit an enclosed finish, subject to the actual control space and check of the Honda replacement references.Voir la pièce Honda OEM Type Open-End Grips ~ Replaces 53165-390-780 Open-end rubber grips with plugsThe same stated length, bar size and Honda references, with open ends and finishing plugs included. Confirm the package contents and any separate end-hardware requirements before completing the order.Voir la pièce

Treat the Honda numbers as replacement references

The two references identify the intended replacement application; they do not establish the contents of an order. These grips are described as OEM-type replicas. If buying for both sides, obtain the supplier’s confirmation of grip count and sides supplied rather than calculating quantity from the reference list.

Resolve an altered bar-end arrangement before purchasing

A fitted mirror, weight or other end attachment introduces its own mounting requirements. The open-end grip listing does not specify accessory compatibility or plug attachment dimensions. Compare those requirements with the actual bars and ask for the missing specifications before choosing the finish.

Ordering questions

Can I rely on the Honda references after changing the handlebar or controls?

Use 53165-390-780 and 53166-390-780 to identify the intended replacement, then measure the altered assembly. These grips specify 7/8-inch bars and 130mm length. Replacement references alone cannot establish clearance or size compatibility with changed controls.

What should I confirm when replacing the throttle and left-hand grips together?

Ask for the number of grips and the side contents supplied under the product order. Neither listing explicitly provides that detail. Confirm it before setting quantity; two replacement references do not establish that both required grips are included.

How should I choose a grip finish around an existing bar-end accessory?

Check the accessory’s attachment arrangement and request the relevant grip and plug fit details. The open-end design includes plugs, but their dimensions and accessory compatibility are unspecified. Choose the finish only after those requirements are resolved for the fitted bars.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1986 Honda CB450SC Nighthawk

Votre panier

×