VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1985 Honda CB450SC Nighthawk — Compte-tours et compteurs de vitesse

An instrument purchase for your 1985 Nighthawk needs more than a diameter comparison. These custom mechanical speedometers state their housing size and mounting centers, while some fitting and electrical details remain unspecified. Resolve those details before ordering a bracket or wiring parts.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Compte-tours et compteurs de vitesse

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB custom vintage style mph speedometer front view

Custom Vintage Style Speedometer MPH

$99.95 USD
03-0760
Custom Vintage Style Speedo (MPH) - Mechanical speedometer ratio: 2240:60. Before ordering, confirm the drive ratio, cable or electrical connection, gauge diameter, and mounting...
Voir les détails
Honda CB custom vintage style kph speedometer front view

Custom Vintage Style Speedometer KPH

$99.95 USD
03-0761
Custom Vintage Style Speedo (KPH) - Mechanical speedometer 60 km/h = 1400 rpm Before ordering, confirm the drive ratio, cable or electrical connection, gauge...
Voir les détails
Comparer

1985 Honda CB450SC Nighthawk · Speedometers Buying guide

Ask for the specification of the complete fitted assembly

Both instruments are approximately 85mm in diameter and 55mm deep, with 57mm mounting-center spacing and LED illumination. Those figures describe the gauges. They do not itemize mounting hardware or state the full clearance once a bracket, cable and electrical connections are attached.

Parts to consider

Custom Vintage Style Speedometer MPH Custom MPH gauge with stated housing sizeThe mechanical MPH choice combines approximately 85mm diameter, 55mm depth and 57mm mounting centers with LED illumination. Its 2240:60 drive calibration must also match the installation.Voir la pièce Custom Vintage Style Speedometer KPH Custom KPH gauge with stated housing sizeThe KPH choice publishes the same approximate housing measurements and mounting spacing. Its mechanical calibration is 60 km/h at 1,400 cable rpm; confirm connections and supplied fittings for the intended assembly.Voir la pièce

Obtain the mounting details missing from the size figures

Mounting-center spacing helps compare a bracket, but cannot establish every fitting or rear-clearance requirement. Ask which mounting pieces accompany the instrument and how much room the complete cable and bracket arrangement needs. The stated housing depth should not be treated as a complete installed-space measurement.

Confirm the cockpit functions before ordering accompanying parts

LED illumination is specified, but operating voltage, wire assignments and built-in warning functions are not identified. Describe the required cockpit functions when requesting those details. That information determines which additional electrical or indicator parts belong in the planned installation.

Ordering questions

Are the listed housing dimensions sufficient to choose a mounting bracket?

Use approximately 85mm diameter, 55mm depth and 57mm mounting centers as initial comparisons. Then obtain the supplied-fitting details and clearance with the cable attached. The listing does not establish the complete assembly dimensions or an itemized bracket package.

What lighting information should accompany a wiring-parts order?

Request the required operating voltage and the purpose of each illumination wire for the chosen gauge. LED lighting is stated, but those electrical details are not. Use confirmed specifications to choose the connections needed for the motorcycle’s wiring plan.

What should I verify before keeping the existing speedometer cable?

Confirm the existing cable’s thread and direction, then check the fitted drive against 2240:60 MPH calibration or 60 km/h at 1,400 cable rpm for KPH. Neither listing specifies a guaranteed cable match for the original installation.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1985 Honda CB450SC Nighthawk

Votre panier

×