Pièces pour motos Honda
Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.
Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.
1985 Honda CB450SC Nighthawk · Electrical Buying guide
The charging unit, warning switch and signal relay offer separate repair choices. Their application lists include the 1985 CB450SC, while their specific connectors, reference numbers and battery requirements determine which replacement is appropriate for the work.
Six-wire charging replacementThe listed unit uses two connector blocks: three yellow wires in one and three wires in a four-space block. Compare the fitted connectors and Honda reference before ordering.Voir la pièce
Genuine Honda warning switchOne oil-pressure warning switch is supplied for a compatible engine. Its listed references include 35500-MJ4-024; confirm the terminal and sealing arrangement against the original.Voir la pièce
Nighthawk signal flasherOne relay is supplied, with one used per compatible motorcycle. Match the original Honda reference and inspect the signal circuit before ordering a replacement for poor flashing.Voir la pièce
Pièces connexes : Clutch-perch starter safety switch · Individual XD05F plug cap · Battery-box cushioning rubber
The available charging choices have different requirements. Identify the battery first, then compare the connectors and original reference. The lithium-only alternative specifies a 14.0V ±0.2 set point and omits the black sensing lead; those details should be assessed against the battery maker’s requirements before purchase.
A replacement switch or relay addresses its own component. The flasher listing calls for checks of bulbs, grounds and connections; the oil-pressure listing calls for verification of actual pressure when the warning remains on. Use those checks to establish the needed part before building the order.
Confirm a lithium-ion battery and its required charging voltage, then compare the replacement connections. The lithium-only unit specifies 14.0V ±0.2 and omits the black sensing lead. It is expressly unsuitable for a standard lead-acid battery.
The switch listing directs you to stop the engine and verify oil level, wiring and actual pressure using the Honda test procedure. Establish the fault before ordering; a warning-switch replacement cannot remedy an engine that fails to build pressure.
Inspect bulb condition and wattage, grounds, corroded connectors and damaged wiring first. The relay listing identifies these as possible causes of poor flashing. Then compare the original Honda relay reference with the replacement’s stated cross-references before ordering.
Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.
Sélectionnez le modèle exact et l’année pour affiner les résultats.
Choisissez votre modèle et l’année.