VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1985 Honda CB450SC Nighthawk — Guidon et commandes

The grip order for a 1985 CB450SC Nighthawk should reflect the bars and controls actually fitted. These two OEM-type choices share their stated dimensions and Honda references. Decide how the ends need to be finished, then confirm what the order supplies.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Guidon et commandes

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB type closed-end grips 53165-390-780

Honda OEM Type Closed-End Grips ~ Replaces 53165-390-780

$16.95 USD
02-2422
Keep your classic Honda looking factory-correct with these Honda OEM-Type Rubber Grips. Faithful replicas of the original grips fitted at the factory, in black...
Honda CB type open-end grips 53165-390-780

Honda OEM Type Open-End Grips ~ Replaces 53165-390-780

$19.95 USD
02-2481
Get factory-correct grip fit with the option to finish the bars your way, these Honda OEM-Type Rubber Grips are open-end replicas of the original...
Comparer

1985 Honda CB450SC Nighthawk · Handlebar Buying guide

Start with the grip space and the existing bar ends

Both choices are black rubber replicas listed for this model year, with 7/8-inch handlebar fit and 130mm length. Their distinction is the end design: closed-end grips or open-end grips with plugs included. Those specifications still need comparison with any changed bars or controls.

Parts to consider

Honda OEM Type Closed-End Grips ~ Replaces 53165-390-780 Closed-end OEM-type rubber gripsA black rubber replica choice with 130mm length and 7/8-inch handlebar fit. The stated replacement references are 53165-390-780 and 53166-390-780; compare the fitted controls and end arrangement.Voir la pièce Honda OEM Type Open-End Grips ~ Replaces 53165-390-780 Open-end grips with finishing plugsThe same stated 130mm length, 7/8-inch fit and Honda references, with an open-end design and included plugs. Confirm supplied grip count and any requirements of separate bar-end hardware before ordering.Voir la pièce

Use the current controls when checking a changed handlebar

A model application cannot describe every replacement handlebar or control arrangement fitted during the motorcycle’s life. Check the diameter, available grip length and end hardware on the actual assembly. The listed dimensions describe the grips, rather than guaranteeing space around altered controls.

Confirm both-side supply before completing the order

The listings identify the two Honda replacement references, but do not explicitly state the number of grips or side contents supplied. Ask for that information when replacing both sides. Included end plugs are stated for the open-end choice; their exact count is not given.

Ordering questions

Which measurements matter when the original handlebar has been replaced?

Check the actual handlebar diameter and the grip space beside the fitted controls. Both choices specify 7/8-inch fit and 130mm length. Compare the existing end arrangement too; the motorcycle’s year alone cannot describe a changed handlebar assembly.

How do the two designs compare against the original Honda grip references?

Both listings replace Honda 53165-390-780 and 53166-390-780, despite their different end designs. Use those references to check the intended replacement, then choose the finish needed. They are OEM-type replicas, so the description does not identify them as genuine Honda grips.

What should I establish before ordering replacements for both sides?

Confirm how many grips are supplied and which sides the order covers. Neither full listing gives that package detail. The two Honda references and photographs do not settle sold quantity, so obtain the contents confirmation before deciding the order quantity.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1985 Honda CB450SC Nighthawk

Votre panier

×