VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1985 Honda CB450SC Nighthawk — Poignées

Choose the grip end design around the finishing hardware planned for your 1985 Nighthawk. Both listed rubber choices measure 130mm and fit 7/8-inch bars. Check their fixed sizing first, then clarify any unanswered plug or accessory-fit details before placing the order.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Poignées

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB type closed-end grips 53165-390-780

Honda OEM Type Closed-End Grips ~ Replaces 53165-390-780

$16.95 USD
02-2422
Keep your classic Honda looking factory-correct with these Honda OEM-Type Rubber Grips. Faithful replicas of the original grips fitted at the factory, in black...
Honda CB type open-end grips 53165-390-780

Honda OEM Type Open-End Grips ~ Replaces 53165-390-780

$19.95 USD
02-2481
Get factory-correct grip fit with the option to finish the bars your way, these Honda OEM-Type Rubber Grips are open-end replicas of the original...
Comparer

1985 Honda CB450SC Nighthawk · Grips Buying guide

Check fixed sizing before choosing the end treatment

Each product has one offered option, using the same stated length, bar size and Honda replacement references. The closed-end design provides the enclosed finish; the open-end listing includes plugs. No alternative dimensions or bar-end accessory compatibility are specified in those options.

Parts to consider

Honda OEM Type Closed-End Grips ~ Replaces 53165-390-780 Enclosed-end 130mm gripsBlack rubber OEM-type replicas with closed ends and 7/8-inch fit. One offered option carries Honda references 53165-390-780 and 53166-390-780; no alternate size selection is listed.Voir la pièce Honda OEM Type Open-End Grips ~ Replaces 53165-390-780 Open-end 130mm grips and plugsBlack rubber OEM-type replicas with open ends, 7/8-inch fit and end plugs included. The plug dimensions and attachment details are not specified, so verify them for the proposed end hardware.Voir la pièce

Clarify accessory fit instead of assuming it from open ends

An open-end grip describes the grip’s design. It does not specify how an accessory secures inside the handlebar or whether the included finishing plug suits that accessory. Give the supplier the actual mirror or weight arrangement when asking for the required fit details.

Use the stated size as the purchasing specification

Both listings specify 130mm length and 7/8-inch bars, with a single product option. If the fitted controls need another length or diameter, ask for a suitable specification before ordering. No alternative size or alteration method is supplied by these listings.

Ordering questions

What should I ask before using the open ends with a bar-end mirror or weight?

Provide the accessory’s attachment requirements and ask whether the proposed grip and plug arrangement suits them. The open-end listing includes plugs but gives no plug dimensions or accessory-fit specification. Open ends alone do not establish compatibility with that hardware.

Is there a size selection for a longer grip or a different handlebar diameter?

Each listing presents one option with 130mm length and 7/8-inch handlebar fit. No other dimensions are selectable. If a changed control layout needs another size, confirm a suitable product specification before choosing these grips for that assembly.

Are extra finishing plugs needed with the open-end grips?

End plugs are expressly included with the open-end choice, so check the supplied contents before ordering duplicate finishing pieces. Their exact number and attachment dimensions are not stated. Confirm those details if the planned end arrangement has specific requirements.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1985 Honda CB450SC Nighthawk

Votre panier

×