VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1985 Honda CB450SC Nighthawk — Plaquettes, mâchoires, durites et tiges de frein

Brake friction renewal on a 1985 Honda CB450SC Nighthawk should include a look at the retained rear linkage. The front listings offer two materials with specific Honda references. Rear shoes are supplied as a matched pair, while the adjusting nut, arm joint and retaining pin are separately identified service pieces.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Plaquettes, mâchoires, durites et tiges de frein

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 CB700 CB650 CB550 brake rod joint 95015-32001

Honda CB750/CB700/CB650/CB550 Brake Rod Joint

$3.50 USD
73-0843
Replace your brake rod joint with this Brake Rod / Arm Joint, replacing OEM #95015-32001.Key Features• Brake rod / arm joint• Replaces OEM #95015-32001•...
Honda CB750 CB700 CB650 CB550 CB500 brake rod joint pin w cotter pin

Honda CB Brake Rod Joint Pin with Cotter Pin

$5.95 USD
73-0844
Replace your brake rod joint pin with this Brake Rod Joint Pin with Cotter Pin, replacing OEM #95015-52000 (joint pin) and #94201-16250 (cotter pin).Key...
Honda CB750 CB700 CB650 CB550 CB500 brake rod adjusting nut 95015-42000

Honda CB Brake Rod Adjusting Nut

$4.50 USD
73-0845
Replace your brake rod adjusting nut with this Brake Rod Adjusting Nut, replacing OEM #95015-42000.Key Features• Brake rod adjusting nut• Replaces OEM #95015-42000• Honda...
Honda CB750 CB650 CB450 front friction pad set 45105-MC9-305

Honda CB750 / CB650 / CB450 Front Friction Pad Set ~ Replaces 45105-MC9-305

$29.95 USD
29-3542
Replace your DOHC CB front brake pads with this Front Brake Pad Set in Kevlar, replacing OEM #45105-MC9-305 / #45105-MA5-771 / #45105-MA5-772.Key Features• Front...
Épuisé
Honda CB750 CB700 CB650 CB550 brake rod adjuster knob joker machine

Honda CB Brake Rod Adjuster Knob ~ Joker Machine

$29.95 USD
73-1072
Upgrade your brake rod adjuster knob with this Joker Machine Brand Custom Brake Rod Adjuster Knob, replacing OEM #95015-42000.Gives your bike a great custom...
Honda CB550 CB450 CB400 rear friction shoe set 43120-413-006

Honda CB550 / CB450 / CB400 Rear Friction Shoe Set ~ Replaces 43120-413-006

$34.95 USD
29-3102
Replace your CB400 or CB450 rear brake shoes with this Rear Brake Shoe Set of 2, replacing OEM #43120-413-006. Diameter 139mm, width 40mm.Key Features•...
Honda CB650 CB450 front sintered metal friction pad set 45105-MC9-006

1982-85 Honda CB650 / CB450 Front Sintered Metal Friction Pad Set ~ Replaces 45105-MC9-006

$34.95 USD
29-3325
Upgrade your CB650 or CB450 front brake pads to sintered metal with this Front Brake Pad Set, replacing OEM #45105-MC9-006 / #45105-MA5-771 / #45105-MC9-003.Key...
Comparer

1985 Honda CB450SC Nighthawk · Friction & Rear Linkage Buying guide

Confirm friction fit, then inspect the components that operate the rear brake

Kevlar and sintered pads share 45105-MA5-771 but have different additional references. Rear shoes are 139 mm diameter by 40 mm wide. The standard rod nut identifies 95015-42000, the joint 95015-32001, and the pin package 95015-52000 with a 94201-16250 cotter pin.

Parts to consider

Honda CB750 / CB650 / CB450 Front Friction Pad Set ~ Replaces 45105-MC9-305 Kevlar front setHonda references 45105-MC9-305 / 45105-MA5-771 / 45105-MA5-772 identify the listed application.Voir la pièce 1982-85 Honda CB650 / CB450 Front Sintered Metal Friction Pad Set ~ Replaces 45105-MC9-006 Sintered front setReferences 45105-MC9-006 / 45105-MA5-771 / 45105-MC9-003; compare the old pad shape.Voir la pièce Honda CB550 / CB450 / CB400 Rear Friction Shoe Set ~ Replaces 43120-413-006 Matched rear drum lining pairTwo shoes at 139 x 40 mm replace 43120-413-006 for the compatible rear drum.Voir la pièce

Pièces connexes : 95015-42000 rear rod adjusting nut · 95015-32001 rear rod arm joint · Rod joint pin with matching cotter retainer

Keep compound choice within the matched front application

The two front sets list this motorcycle but do not publish a stopping-performance comparison or complete-motorcycle set count. Match the actual pads and caliper application before selecting material. Where a motorcycle has two compatible front calipers, the listings call for the same compatible compound and condition on both sides.

Use the linkage inspection to choose individual rear service pieces

The rear hardware guidance names rod, pedal, brake arm, joint holes and return mechanism as inspection points. The nut, joint and pin each have their own supplied quantity and reference. Replace the pieces the inspection identifies, rather than treating those separate items as a mandatory kit with every shoe purchase.

Parts ordering FAQs

What references distinguish the sintered option from the Kevlar front set?

The sintered option names 45105-MC9-006, 45105-MA5-771 and 45105-MC9-003. Kevlar instead names 45105-MC9-305, 45105-MA5-771 and 45105-MA5-772. The shared number is useful, but compare the removed pad’s outline and application before choosing the offered compound.

Which rod and joint details should guide a rear linkage hardware order?

Compare joint 95015-32001, adjusting nut 95015-42000 and pin 95015-52000 with cotter 94201-16250 against the fitted linkage. Inspect the rod, joint holes and retained hardware for wear or bending, and check the retainers before choosing individual replacement pieces.

What condition checks should accompany the measured rear shoe pair?

The shoe listing calls for inspecting the drum surface and service-limit diameter, return springs, cam and pivots. Rear linkage guidance also names worn or bent rod and joint components. Use that assessment to identify any additional work beyond the supplied two-shoe set.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1985 Honda CB450SC Nighthawk

Votre panier

×