VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1982 Honda CB450SC Nighthawk — Pipes d’admission, manchons et colliers

The 1982 Honda CB450SC Nighthawk intake-holder choices are an individual holder with its O-ring or a separate four-pack of sealing rings. Inspect the rubber holders before deciding. A sound holder needing a seal creates a different order from cracked or hardened intake rubber.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Pipes d’admission, manchons et colliers

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Nouveau
Honda CB450 CB400 cylinder head intake boot o-rings (set 4) 91301-371-005

1978-86 Honda CB450 / CB400 Cylinder Head Intake Boot O-Rings (Set/4) ~ Replaces 91301-371-005

$8.19 USD
48-5044
Replace your cylinder head intake boot O-rings with this Cylinder Head Intake Boot O-Rings Set of 4, size 40 x 2.6mm. Replaces OEM #91301-371-005...
Honda CB450 CB400 carb holder with o-ring 16211-447-670

1980-86 Honda CB450 / CB400 Carb Holder with O-Ring ~ Replaces 16211-447-670

$24.95 USD
33-0017
Ensure a secure and reliable connection between the carburetor and intake with this Carb Holder with O-Ring, designed as a direct replacement for the...
Comparer

1982 Honda CB450SC Nighthawk · Carb Holders & Intake Seals Buying guide

Order holders and cylinder-head seals by their stated quantities

Each holder includes one O-ring, and two holder assemblies service both intake connections. The separate pack supplies four 40 x 2.6 mm O-rings; the listed motorcycle uses two at the cylinder-head joints. Airbox boots and clamps are not part of these selected packages.

Parts to consider

1980-86 Honda CB450 / CB400 Carb Holder with O-Ring ~ Replaces 16211-447-670 Intake holder with one sealing ringOne holder with one O-ring; two assemblies are needed to replace both listed intake connections.Voir la pièce 1978-86 Honda CB450 / CB400 Cylinder Head Intake Boot O-Rings (Set/4) ~ Replaces 91301-371-005 Four-pack of intake-joint O-ringsFour 40 x 2.6 mm rings, referencing 91301-371-005 / 91325-413-830; two rings are used per listed motorcycle.Voir la pièce

Inspect the holder before choosing seals alone

The separate O-ring source calls for checks of cracks, hardening and flat sealing faces. A damaged holder can leave an intake leak even with a new seal. Compare both sides and the cylinder-head sealing surfaces before deciding whether separate rings are sufficient.

Avoid adding seals automatically to new holder assemblies

An O-ring is already included with each holder. Two new assemblies therefore provide the two included rings for their joints. The four-pack is useful when separate seals are needed and contains two motorcycle sets according to its source; it is not a four-holder package.

Common questions

Do I need a separate O-ring pack when buying both holder assemblies?

Each holder assembly already includes one O-ring. Two assemblies supply two holders and two included rings for the listed intake connections. Add a separate seal pack only for another identified sealing requirement, rather than automatically duplicating the holder-package contents.

How many motorcycles can the four-pack of intake O-rings service?

The pack contains four 40 x 2.6 mm rings. The listing specifies two at the cylinder-head intake joints on the listed two-cylinder motorcycles, so one pack contains two complete motorcycle sets for that matched seal application.

When should I choose a holder assembly rather than just new sealing rings?

Inspect for cracked or hardened rubber and damaged sealing faces. The O-ring listing warns that an intake leak can remain if the holder or mounting surface is damaged. Choose the holder assembly when the matched holder itself needs renewal.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1982 Honda CB450SC Nighthawk

Votre panier

×