VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1982 Honda CB450SC Nighthawk — Compte-tours et compteurs

Decide what your 1982 Nighthawk speedometer work needs before replacing parts. A listed replacement cable supports the existing arrangement, while the two vintage-style speedometers require a custom installation with matching mechanical calibration, cable connection and clearance for the housing.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Compte-tours et compteurs

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB1000 CB900 CB750 CB650 speedo gear plug

Honda CB1000/CB900/CB750/CB650 Speedo Gear Plug

$43.95 USD
29-0538
Keep your speedo drive gear clean with this Speedo Gear Plug, 15mm outer diameter, 22mm long.Key Features• Speedo gear plug• 15mm outer diameter, 22mm...
Épuisé
Honda CB750C CB650C CB450SC speedometer cable 44830-MA5-670

1981-82 Honda CB750C / CB650C / CB450SC Speedometer Cable ~ Replaces 44830-MA5-670

$23.45 USD
73-0199
Replace your CB Custom or CB450SC speedometer cable with this Speedometer Cable, replacing OEM #44830-MA5-670. Made in Japan.Key Features• Speedometer cable• Replaces OEM #44830-MA5-670•...
Honda CB custom vintage style mph speedometer front view

Custom Vintage Style Speedometer MPH

$99.95 USD
03-0760
Custom Vintage Style Speedo (MPH) - Mechanical speedometer ratio: 2240:60. Before ordering, confirm the drive ratio, cable or electrical connection, gauge diameter, and mounting...
Voir les détails
Honda CB custom vintage style kph speedometer front view

Custom Vintage Style Speedometer KPH

$99.95 USD
03-0761
Custom Vintage Style Speedo (KPH) - Mechanical speedometer 60 km/h = 1400 rpm Before ordering, confirm the drive ratio, cable or electrical connection, gauge...
Voir les détails
Comparer

1982 Honda CB450SC Nighthawk · Tach & Speedo Buying guide

Separate cable maintenance from a custom instrument plan

The Japanese-made cable replaces Honda reference 44830-MA5-670 for the listed 1982 application. The MPH and KPH instruments offer different scales and calibrations; neither listing promises a direct stock replacement. A drive-opening plug is relevant only if the original cable is deliberately removed.

Parts to consider

1981-82 Honda CB750C / CB650C / CB450SC Speedometer Cable ~ Replaces 44830-MA5-670 Replacement speedometer cableJapanese-made cable replacing Honda reference 44830-MA5-670, with the 1982 CB450SC Nighthawk expressly listed. One cable is supplied; inspect the existing drive and gauge as part of the job.Voir la pièce Custom Vintage Style Speedometer MPH Vintage-style MPH speedometerA mechanical 0–130 mph instrument using 2240:60 calibration, approximately 85mm diameter and 57mm mounting centers. LED illumination is listed, and custom mounting is required.Voir la pièce Custom Vintage Style Speedometer KPH Vintage-style KPH speedometerA mechanical 0–220 km/h instrument calibrated for 60 km/h at 1,400 cable rpm. It shares the stated 85mm housing size and 57mm mounting centers, with custom mounting required.Voir la pièce

Pièces connexes : Plug for an unused original drive opening

Inspect the parts the cable connects

A fresh cable cannot repair a worn or binding instrument or wheel-mounted drive. Check those parts and make sure the cable seats at both ends, follows a route without sharp bends or tension, and receives only the lubrication its maker specifies.

Treat the gauge choice as an installation plan

Select the speed units you want, then confirm the drive calibration, cable thread and direction, housing clearance and wiring. The listed model application accompanies a custom-mounting requirement, so it does not establish stock-cluster interchangeability.

Common ordering questions

What can I check before buying a cable for a noisy or erratic speedometer?

Inspect the gauge and wheel-mounted drive for wear or binding, and check that both cable ends seat fully. The cable’s current instructions also call for routing without sharp bends or tension; a new cable cannot repair those other faults.

How do I decide between the MPH and KPH versions?

Choose the desired scale, then verify the stated calibration: 2240:60 for the 0–130 mph version, or 60 km/h at 1,400 cable rpm for the 0–220 km/h version. Both require a compatible mechanical drive and custom mounting.

What if I leave the original wheel-drive opening unused?

The listed gear plug closes that opening when the original cable is removed. One approximately 15mm-OD, 22mm-long plug is supplied; confirm secure seating and retention, plus clearance from the wheel, fork, axle and drive gear.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1982 Honda CB450SC Nighthawk

Votre panier

×