VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1969 Honda CB450K — Pièces de bras oscillant

Identify each component removed from your 1969 CB450K swingarm before choosing bushings or sealing parts. Bronze thrust bushings, another bronze bushing set, felts and metal caps are separate purchases. The shock-to-swingarm mounting bushing serves another location and has its own stated dimensions.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Pièces de bras oscillant

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 CB550 CB500 CB450 CB350 swing arm felt set 2 52145-283-000

Honda CB Swing Arm Felt Set/2 ~ Replaces 52145-283-000

$6.76 USD
73-1129
Protect your swingarm and enhance rear suspension longevity with this OEM-style Swing Arm Felt Set. These felts are designed to sit inside the pivot...
Nouveau
Honda CB750 CB550 CB500 rear shock swingarm bushing 40548-268-000

Honda CB Rear Shock Swingarm Bushing ~ Replaces 40548-268-000

$6.20 USD
28-6918
Rear shock swingarm bushing designed to replace the original Honda component, matching OEM reference 40548-268-000. Fits between the shock and swingarm to provide proper...
Honda CB750 CB550 swingarm pivot bolt locknut w washer 90354-268-000

Honda CB Swingarm Pivot Bolt Locknut with Washer ~ Replaces 90354-268-000

$7.00 USD
29-7022
Replace your swingarm pivot bolt locknut and washer with this Swingarm Pivot Bolt Locknut with Locknut Washer. Replaces OEM #90354-268-000 (locknut) and #90526-268-000 (washer).Key...
Solde
Honda CB750 CB550 CB500 bronze thrust bushing set 2 52109-283-300

Honda CB Bronze Thrust Bushing Set/2 ~ Replaces 52109-283-300

$31.72 $24.95 USD
You save $6.77
73-0883
Upgrade your swingarm bushings with this Bronze Thrust Bushing Set of 2. Replace the cheaply made, worn-out factory swingarm bushings with a 2-piece set...
Honda CB750 CB550 CB500 CB450 swingarm grease fitting nipple (pk 2) 96201-30001

Honda CB Swingarm Grease Fitting Nipple (Pk/2)

$7.95 USD
73-0941
Replace your swingarm grease fittings with this Grease Fitting Nipple A .45 Pk/2. These fittings are used with the swingarm. Replaces OEM #96201-30001.Key Features•...
Honda CB750 CB550 CB500 swingarm dust seal cap (set 2) 52144-283-010

Honda CB Swingarm Dust Seal Cap (Set/2) ~ Replaces 52144-283-010

$9.95 USD
29-7024
Replace your swingarm dust seal caps with this Swingarm Dust Seal Metal Cap Set of 2. These metal caps fit on the ends of...
Comparer

1969 Honda CB450K · Swing Arm Parts Buying guide

Distinguish pivot components from the rear shock mounting

The thrust bushings replace 52109-283-300. Felts and metal dust caps use different references and are each sets of two. Check the pivot hardware separately; the locknut-and-washer listing does not state a replacement pivot bolt or sleeve supplied.

Parts to consider

Honda CB Bronze Thrust Bushing Set/2 ~ Replaces 52109-283-300 Bronze thrust bushings, two-piece setTwo thrust bushings replacing 52109-283-300. Match the pivot component being replaced; the separate bronze swingarm bushing listing is another product.Voir la pièce Honda CB Swing Arm Felt Set/2 ~ Replaces 52145-283-000 Left and right swingarm pivot feltsSet of two pivot felts referencing 52145-283-000. Metal dust caps are a separate purchase; compare both types of sealing component during the repair.Voir la pièce Honda CB Swingarm Dust Seal Cap (Set/2) ~ Replaces 52144-283-010 Metal pivot dust caps, set of twoTwo metal caps for the swingarm pivot ends, replacing 52144-283-010. Inspect the existing caps and check the pivot felts and bushings separately.Voir la pièce

Pièces connexes : Pivot locknut and washer · Shock-to-swingarm mounting bushing

Identify the bushing before comparing its dimensions

The shock mounting bushing references 40548-268-000 and is listed at 19mm length, 22mm OD and 10mm ID. It is sold individually and fits between the shock and swingarm. Those details describe a different component from the pivot thrust bushings and other bronze pivot bushing set.

Plan sealing and fastening parts as separate purchases

The metal caps, felts and bushing sets have separately stated contents. The pivot fastening product supplies a locknut and washer, referencing 90354-268-000 and 90526-268-000. Inspect the remaining bolt and sleeve and identify any additional components instead of assuming one package renews the whole pivot assembly.

CB450K buying questions

Can the other bronze bushing set replace the thrust bushing set?

The thrust set identifies reference 52109-283-300; the other bronze swingarm bushing set is a separate product without dimensions stated. Compare the specific pivot component and confirm its measurements. Shared material and two-piece quantities do not establish interchangeability.

What measurements are given for the shock mounting bushing?

The listing states 19mm length, 22mm outside diameter and 10mm inside diameter, with reference 40548-268-000 and individual supply. Compare the shock-to-swingarm mounting component removed; these measurements are not specifications for the separate pivot bushings.

Does ordering two metal caps also supply the pivot felts?

The metal dust cap set confirms two caps referencing 52144-283-010. The left and right felts are listed separately as two pieces with reference 52145-283-000. Check the existing components to decide whether the repair needs one set or both.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1969 Honda CB450K

Votre panier

×