Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

Consultation en cours Amortisseurs

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB OEM Type Shock Absorber Washer ~ Replaces 90521-292-000

$2.95 USD
49-0778
Replace your shock absorber washers with this Shock Absorber Washer, a replica of the OEM type used when installing shocks. Replaces OEM #90521-292-000.Note: 2...

Honda CB Shock Absorber Joint Rubber Set/2 ~ Replaces 52484-292-000

$6.76 USD
73-0093
Replace your shock joint rubbers with this Shock Absorber Joint Rubber Set of 2, replacing OEM #52484-292-000.Key Features• Shock absorber joint rubbers• Set of...

Universal Motorcycle Shorty Shock Absorber Set ~ Chrome Shrouded 290mm

$119.95 USD
06-3591
Drop the back end with a clean all-chrome look using this Custom Shorty Shock Absorber Set. Chrome body and shroud with chrome progressive-wound springs,...

Honda CB Stock Length Shock Absorber Set ~ Black 335mm

$139.95 USD
06-3598
Stick with stock geometry but blacked out with this All-Black Stock-Length Shock Absorber Set. Black body, black progressive-wound heavy-duty springs, and a black end...

Honda CB Stock Length Shock Absorber Set ~ Chrome 335mm

$139.95 USD
06-3623
Go with a clean all-chrome stock-length setup without the end-cap detail using this Stock-Length Shock Absorber Set. Chrome body with chrome progressive-wound heavy-duty springs,...
Nouveau
Honda CB chrome 335mm shock absorber set side detail

Honda CB Stock Length Shock Absorber Set ~ Chrome 335mm

$139.95 USD
06-3588
Step up to a clean chromed-out rear end with this All-Chrome Stock-Length Shock Absorber Set. Features a chrome body, chrome progressive-wound heavy-duty springs, and...

Universal Motorcycle Shorty Shock Absorber Set ~ Black Shrouded 290mm

$129.95 USD
06-3590
Get the shortened look with a bit more coverage using this Custom Shorty Shock Absorber Set featuring a black body and shroud with black...

Honda CB Stock Length Shock Absorber Set ~ Black / Chrome 335mm

$139.95 USD
06-3603
Mix a blacked-out body with chromed-out springs using this Stock-Length Shock Absorber Set. Black body paired with chrome progressive-wound heavy-duty springs, a sharp two-tone...
Épuisé
Universal black 290mm eye-to-eye shorty motorcycle shock absorber set

Universal Motorcycle Shorty Shock Absorber Set ~ Black Eye-to-Eye 290mm

$139.95 USD
06-3592
Go shorter with a different mounting configuration using this Custom Shorty Shock Absorber Set. Black body and shroud with black progressive-wound springs, 290mm (11...

Honda CB Stock Design Shock Absorber Set ~ Chrome 321mm

$139.95 USD
06-3642
Restore factory-look rear suspension with this Stock-Design Shock Absorber Set, modelled after the original OEM shocks on a range of CB500, CB550, CB450/CL450, and...
Épuisé
Universal black 290mm shorty motorcycle shock absorber set

Universal Motorcycle Shorty Shock Absorber Set ~ Black 290mm

$139.95 USD
06-3589
Slam the back end with this Custom Shorty Shock Absorber Set, measuring 290mm (11 3/8") eye-to-clevis, noticeably shorter than stock for custom café, bobber,...

1969 Honda CB450K · Shock Absorbers Buying guide

Resolve length and mounting style before choosing finish

The 321mm and 335mm sets have eye-to-clevis layouts but different stated lengths. The custom 290mm family includes both eye-to-clevis and eye-to-eye versions. Compare the individual product measurements and mount details with the motorcycle being worked on.

Use the measurements to assess the competing choices

The stock-design and stock-length descriptions state 321mm and 335mm respectively. Treat those as product dimensions to compare with the installed shocks and replacement references. Do not infer a single factory CB450K length, unchanged ride height or matching clearance solely from a stock-related product name.

Check the complete custom mounting arrangement

The 290mm eye-to-clevis listings give a 12mm ID × 21mm upper bushing, but not the lower clevis opening width or bolt diameter. The separate eye-to-eye version states 10mm ID × 21mm bushings at both ends. Confirm the actual mounts and required clearance before ordering a custom set.

CB450K buying questions

How should I choose between the 321mm and 335mm sets?

Compare the shocks fitted, the listed measurement method, both mounting ends and applicable replacement references. The two families state different lengths. Their stock-related names do not establish which length matches an original or previously modified 1969 CB450K.

Can the eye-to-eye 290mm set replace an eye-to-clevis set directly?

The mounting layouts differ. The eye-to-eye version specifies 10mm ID × 21mm bushings at both ends; the eye-to-clevis versions specify a 12mm ID × 21mm upper bushing. Confirm the complete custom mounting arrangement rather than assuming interchangeability.

Should I order the separate washers whenever I buy the 335mm set?

The 335mm set explicitly lists washers among its included hardware. The separate OEM-type washer references 90521-292-000 and states two required per bike, without clearly giving supplied pack quantity. Compare what the installed mounting needs before adding another purchase.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité

Votre panier

×