VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1969 Honda CB450K — Jantes, rayons, joints de roue et valves

Start with the wheel and hub fitted to your 1969 CB450K when choosing service parts. The front bearing, rear seal and sprocket-side rear bearing retainer are different components. Compare the part removed, its position and its specification before deciding which purchases the repair requires.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Jantes, rayons, joints de roue et valves

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB1100 CB1000 CB900 CB750 CB650 6302-2RS front wheel bearing

Honda CB 6302-2RS Front Wheel Bearing

$14.95 USD
28-6302
Replace your front wheel bearing with this 6302-2RS Front Wheel Bearing with 2 synthetic shields. High quality, made in Japan.2 used per front, order...
Nouveau
Honda CB750 CB500 CB450 rear wheel bearing retainer 41231-283-000

Honda CB Rear Wheel Bearing Retainer ~ Replaces 41231-283-000

$26.95 USD
28-4015
Replace your rear wheel bearing retainer with this Rear Wheel Bearing Retainer (sprocket side), replacing OEM #41231-283-000. Used on the sprocket side of the...
Honda CB650 CB550 CB500 CB450 rear wheel seal 34 x 55 x 9

Honda CB650 / CB550 / CB500 / CB450 Rear Wheel Seal ~ 34 x 55 x 9

$5.95 USD
27-9042
Replace your CB650, CB500T/CB550, or CB450K rear wheel seal with this Rear Wheel Seal, 1 piece, 34 x 55 x 9mm. Made in Japan...
Comparer

1969 Honda CB450K · Rims, Spokes, Wheel Seals & Tire Valve Stems Buying guide

Check hub position, bearing code and seal dimensions

The 6302-2RS bearing is listed for the front wheel. The rear seal is 34 × 55 × 9mm and explicitly supplies one piece. The rear retainer references 41231-283-000 and belongs on the sprocket side.

Parts to consider

Honda CB 6302-2RS Front Wheel Bearing 6302-2RS front wheel bearingFront application with two bearings stated as required per front wheel. The description does not clearly establish supplied pack quantity; confirm it before ordering for both positions.Voir la pièce Honda CB650 / CB550 / CB500 / CB450 Rear Wheel Seal ~ 34 x 55 x 9 Rear wheel seal, one pieceRear seal measuring 34 × 55 × 9mm, with one piece supplied. Match the seal removed and the fitted rear hub before selecting.Voir la pièce Honda CB Rear Wheel Bearing Retainer ~ Replaces 41231-283-000 Rear sprocket-side bearing retainerRetainer replacing 41231-283-000 on the sprocket side of the rear wheel. The listing does not confirm a wheel bearing included with the retainer.Voir la pièce

Verify parts against the hub actually being serviced

A different wheel or hub may need different service parts. Match the bearing marking and seal dimensions to the installed assembly, and compare the rear retainer with its replacement reference. The CB450K application does not document the details of a previously changed hub or wheel.

Separate the required bearing count from supplied contents

The front bearing description says two are used per front wheel, but does not clearly state how many are supplied per order. Confirm that detail before ordering for both positions. The rear seal is different: its description explicitly confirms one piece supplied, with the listed rear application.

CB450K buying questions

Does the 6302-2RS front bearing listing also verify a rear bearing fit?

It is listed as a front wheel bearing for the CB450K. A rear application is not established by that description. Compare the rear bearing’s marking and fitted hub specification separately before choosing a bearing for the rear wheel.

Is a new wheel bearing supplied with the rear retainer?

The product describes the sprocket-side rear bearing retainer, reference 41231-283-000, without confirming a bearing included. Inspect the retainer and bearings as separate components and identify any bearing purchase required for the planned hub repair.

Which quantity can I rely on for the rear seal and front bearing?

The rear seal states one piece supplied. The front bearing states two required per front wheel, without clearly defining supplied quantity per order. Confirm the bearing package contents before choosing enough to replace both front bearing positions.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1969 Honda CB450K

Votre panier

×