1968 Honda CB450K Swingarm Pivot Parts

Préciser la sous-catégorie

Consultation en cours Pièces de bras oscillant

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Trier par

Honda CB750 CB550 CB500 CB450 CB350 swing arm felt set 2 52145-283-000

Honda CB Swing Arm Felt Set/2 ~ Replaces 52145-283-000

$6.76 USD

Protect your swingarm and enhance rear suspension longevity with this OEM-style Swing Arm Felt Set. These felts are designed to sit inside the pivot...

Nouveau

Honda CB750 CB550 CB500 rear shock swingarm bushing 40548-268-000

Honda CB Rear Shock Swingarm Bushing ~ Replaces 40548-268-000

$6.20 USD

Rear shock swingarm bushing designed to replace the original Honda component, matching OEM reference 40548-268-000. Fits between the shock and swingarm to provide proper...

Honda CB750 CB550 swingarm pivot bolt locknut w washer 90354-268-000

Honda CB Swingarm Pivot Bolt Locknut with Washer ~ Replaces 90354-268-000

$7.00 USD

Replace your swingarm pivot bolt locknut and washer with this Swingarm Pivot Bolt Locknut with Locknut Washer. Replaces OEM #90354-268-000 (locknut) and #90526-268-000 (washer).Key...

Solde

Honda CB750 CB550 CB500 bronze thrust bushing set 2 52109-283-300

Honda CB Bronze Thrust Bushing Set/2 ~ Replaces 52109-283-300

$31.72 $24.95 USD

You save $6.77

Upgrade your swingarm bushings with this Bronze Thrust Bushing Set of 2. Replace the cheaply made, worn-out factory swingarm bushings with a 2-piece set...

Honda CB750 CB550 CB500 CB450 swingarm grease fitting nipple (pk 2) 96201-30001

Honda CB Swingarm Grease Fitting Nipple (Pk/2)

$7.95 USD

Replace your swingarm grease fittings with this Grease Fitting Nipple A .45 Pk/2. These fittings are used with the swingarm. Replaces OEM #96201-30001.Key Features•...

Honda CB750 CB550 CB500 swingarm dust seal cap (set 2) 52144-283-010

Honda CB Swingarm Dust Seal Cap (Set/2) ~ Replaces 52144-283-010

$9.95 USD

Replace your swingarm dust seal caps with this Swingarm Dust Seal Metal Cap Set of 2. These metal caps fit on the ends of...

Comparer

1968 Honda CB450K · Swing Arm Parts Buying guide

Build the pivot order one component at a time

The thrust bushings, other bronze bushings, felts and metal caps are separate sets. A locknut with washer is separate hardware. Match the location and reference before assuming one set supplies or replaces the others.

Parts to consider

Honda CB Bronze Thrust Bushing Set/2 ~ Replaces 52109-283-300

Bronze thrust bushings, set of twoTwo bronze thrust bushings referencing 52109-283-300. Compare the pivot component needed; this is a separate listing from the other bronze swingarm bushing set.Voir la pièce

Honda CB Swing Arm Felt Set/2 ~ Replaces 52145-283-000

Swingarm felts, set of twoTwo pivot felts referencing 52145-283-000. The description identifies left and right pieces; metal dust caps are supplied in a separate listing.Voir la pièce

Honda CB Swingarm Dust Seal Cap (Set/2) ~ Replaces 52144-283-010

Metal dust seal caps, set of twoTwo metal caps for the swingarm pivot ends, referencing 52144-283-010. Compare the installed caps and check the other pivot components separately.Voir la pièce

Pièces connexes : Pivot locknut with washer · Rear shock mounting bushing

Separate the pivot fastening parts

The locknut-and-washer listing references 90354-268-000 and 90526-268-000. It does not state that a new pivot bolt or sleeve is supplied. Inspect those components independently and order for their condition instead of reading the product title as a full pivot fastening kit.

Do not confuse the shock bushing with pivot bushings

The rear shock swingarm bushing fits at the shock-to-swingarm mounting point and references 40548-268-000. Its stated dimensions are 19mm length, 22mm OD and 10mm ID, with individual supply. Keep it separate from the pivot thrust bushings, felts and caps.

CB450K buying questions

Does a dust cap set also include the felt pieces?

The metal cap set confirms two caps. The felts have a separate listing referencing 52145-283-000 and also state a set of two. Compare both components during the repair; one package does not establish that the other is supplied.

Does the pivot locknut product include a replacement bolt?

Its stated contents are the locknut and washer, referencing 90354-268-000 and 90526-268-000. A new pivot bolt is not listed as supplied. Inspect the bolt and sleeve separately before deciding what the assembly needs.

Is the rear shock bushing the same part as the thrust bushings?

It is a separate mounting component referencing 40548-268-000, listed at 19mm length, 22mm OD and 10mm ID. The thrust bushing set instead references 52109-283-300. Match the position and reference rather than ordering by the word bushing alone.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité

Catégories de pièces pour 1968 Honda CB450K

Aide et renseignements

Sélectionnez votre moto

Rechercher des pièces