VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1968 Honda CB450K — Poignées

Replacing grips on a 1968 CB450K calls for a length and control-fit check as well as the right appearance. The option here is black rubber with closed ends. Match its 130mm length and 7/8-inch bar application to the motorcycle’s current setup.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Poignées

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Type closed-end grips 95011-14100

Honda OEM Type Closed-End Grips ~ Replaces 95011-14100

$16.95 USD
02-2424
Fit the correct grips on your earliest-era Honda with these Honda OEM-Type Rubber Grips. Accurate replicas of the factory grips fitted to the oldest...
Comparer

1968 Honda CB450K · Grips Buying guide

Match the grip to the controls you intend to keep

These factory-style replicas are intended for the listed early Honda applications. Check the throttle sleeve and usable grip length before choosing, and confirm package contents rather than inferring a complete set from the title.

Parts to consider

Honda OEM Type Closed-End Grips ~ Replaces 95011-14100 Closed-end black rubber gripsOEM-type replicas with 130mm length and a 7/8-inch handlebar application. Honda replacement references are 95011-14100 and 95011-14200; exact internal dimensions are not listed.Voir la pièce

Keep the application and internal dimensions distinct

The listed 7/8-inch application identifies the handlebar size, not a complete set of grip-bore measurements. Confirm the grip fit on the throttle sleeve as well as the fixed bar. This matters when the controls fitted now differ from the motorcycle’s original arrangement.

Verify the supplied contents before ordering

Two Honda references and a plural product name do not state the package quantity. If you need both sides for a restoration, confirm what is supplied and how the grips are sold before placing the order. Avoid choosing the order quantity from the photograph alone.

Buying questions

Is bar diameter enough to choose grips for a changed throttle sleeve?

The bar application is only part of the fit check. Compare the throttle sleeve actually installed and the available grip length with the product requirements. Exact internal grip dimensions are not given, so confirm compatibility with changed controls before ordering.

Can these be treated as open-ended grips for accessory mounting?

The product is described as closed-end. Check the mounting needs of your bar-end accessories before choosing it. An accessory requiring access through the end needs a suitable grip arrangement that this description does not establish.

What information helps confirm fit to an aftermarket throttle sleeve?

Identify the sleeve and its dimensions, along with the usable grip length and bar size. The listing does not publish every internal grip dimension, so confirm compatibility with that sleeve before ordering the restoration-style grip.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1968 Honda CB450K

Votre panier

×