VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1981 Honda CB400TB — Poignées

Choose the rubber grip end style that suits your 1981 CB400TB’s controls and accessories. Both options are black factory-style replicas for 7/8-inch handlebars with a listed 130 mm length; the open-end choice includes plugs, while the other has closed ends.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Poignées

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB type closed-end grips 53165-390-780

Honda OEM Type Closed-End Grips ~ Replaces 53165-390-780

$16.95 USD
02-2422
Keep your classic Honda looking factory-correct with these Honda OEM-Type Rubber Grips. Faithful replicas of the original grips fitted at the factory, in black...
Honda CB type open-end grips 53165-390-780

Honda OEM Type Open-End Grips ~ Replaces 53165-390-780

$19.95 USD
02-2481
Get factory-correct grip fit with the option to finish the bars your way, these Honda OEM-Type Rubber Grips are open-end replicas of the original...
Comparer

1981 Honda CB400TB Hawk · Handlebar Grips Buying guide

Match grip ends to the fitted bar-end arrangement

Start with the fitted handlebar diameter, available grip length and throttle-side clearance. Once those match, choose closed rubber ends or the open-end version with its supplied plugs to suit the existing arrangement.

Parts to consider

Honda OEM Type Closed-End Grips ~ Replaces 53165-390-780 Closed-end replica gripsBlack factory-style replica grips for 7/8-inch handlebars, 130 mm long.Voir la pièce Honda OEM Type Open-End Grips ~ Replaces 53165-390-780 Open-end replica gripsBlack 130 mm grips for 7/8-inch handlebars, supplied with end plugs.Voir la pièce

Replica styling with two end treatments

These are aftermarket Honda-style rubber grips referencing 53165-390-780 and 53166-390-780. Choose closed ends for a closed rubber finish, or open ends when that suits the bar-end arrangement. The open-end version includes plugs, but that does not establish compatibility with a particular mirror or weight.

Inspect the throttle-side parts before fitting

The throttle tube is a separate component from the rubber grip in Honda’s control assembly. Check its condition and available length, then follow the appropriate fitting procedure. After installation, confirm free throttle movement and return before riding; grip or bar-end interference needs to be corrected.

Buying questions

Are these genuine Honda grips?

They are factory-style aftermarket replicas. Their application references the original right and left Honda grip numbers, but they should not be confused with genuine Honda-branded parts when planning an original-parts restoration.

What is different about the open-end set?

The rubber ends are open, and end plugs are included. The listed length remains 130 mm for the same 7/8-inch handlebar application. Check accessory mounting and throttle clearance independently if fitting bar-end equipment.

Should I choose the grip solely by the motorcycle year?

Also check the handlebars and throttle tube that are actually fitted. A previous owner may have changed them. Confirm the 7/8-inch application, available 130 mm length and clearance at both ends before ordering.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1981 Honda CB400TB

Votre panier

×