VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1978 Honda CB550K — Flotteurs et composants de carburateur

For 1978 Honda CB550K float and drain purchases, first identify whether the float, a drain screw or a seal is the component needed. The float listing names a pin, the drain screw supplies an O-ring, and the seal-only package contains four drain-screw O-rings.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Flotteurs et composants de carburateur

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB1100 CB1000 CB900 CB750 float bowl drain screw o-rings pk 4

Honda CB Float Bowl Drain Screw O-Rings Pk/4

$5.80 USD
48-0792
Replace your float bowl drain screw O-rings with this Float Bowl Drain Screw O-Rings 4-Pack.Key Features• Float bowl drain screw O-rings• 4 per packFitment...
Honda CB1100 CB1000 CB900 CB750 CB550 air screw needle o-ring

Honda CB Air Screw Needle O-Ring

$1.95 USD
48-5043
Replace your air screw needle O-ring with this Air Screw Needle O-Ring, 2.8mm x 1.2mm.Note: sold each, order the quantity you require.Key Features• Air...
Honda CB1100 CB1000 CB900 CB750 float bowl drain screw -a

Honda CB Stock Type Float Bowl Drain Screw ~-A

$6.50 USD
48-5042
Small part, but an important one. This float bowl drain screw with included O-ring allows you to properly drain the carburetor bowl without leaks,...
Honda CB1100 CB1000 CB900 CB750 float bowl drain screw

Honda CB Stock Type Float Bowl Drain Screw

$6.50 USD
48-5042
Replace your stock-type float bowl drain screw with this Float Bowl Drain Screw with O-Ring for the later DOHC and Nighthawk lineup.Note: sold each,...
Honda CB750 CB650 CB550 CB125 carb float 16013-405-004

Honda CB750 / CB650 / CB550 / CB125 Carb Float ~ Replaces 16013-405-004

$27.95 USD
20-6509
Replace your late-'70s CB carb float with this Carb Float with Pin, replacing OEM #16013-405-004 / #16013-393-004 / #16013-KCY-670 / #16013-MN1-671.4 carb floats are...
Honda CB750 CB550 CB400 CB350 Keihin pd carburetor felt throttle shaft seal set 6

Honda CB750 / CB550 / CB400 / CB350 Keihin PD Carburetor Felt Throttle Shaft Seal Set/6

$21.95 USD
33-0045
Replace worn or missing felt throttle shaft seals during carburetor service on compatible vintage Honda CB models with Keihin PD carburetors. These felt seals...
Comparer

1978 Honda CB550K · Carb Floats & Other Carb Components Buying guide

Choose the float or drain component actually needed

Float and pin contents differ from screw-and-seal and O-ring-only purchases. Check the fitted carburetor and seal position before combining these products, especially where a new drain screw already supplies the seal being considered separately.

Parts to consider

Honda CB750 / CB650 / CB550 / CB125 Carb Float ~ Replaces 16013-405-004 Carburetor float with pinFloat-and-pin product; its description states four floats used per bike, with quantity to be checked.Voir la pièce Honda CB Stock Type Float Bowl Drain Screw Drain screw supplied with O-ringStock-type screw explicitly sold each with its O-ring; compare the fitted drain hardware.Voir la pièce Honda CB Float Bowl Drain Screw O-Rings Pk/4 Four-pack of drain-screw O-ringsFour drain-screw seals, separately offered from replacement screws.Voir la pièce

Pièces connexes : Separately sold air-screw needle O-ring

Keep the float’s pin separate from inlet-needle needs

The float product supplies a pin and lists four floats used per bike. That application requirement is a quantity check, not proof of a four-float sales package. Identify the required float purchase and any separate needle requirement; a float needle is not named in the float-and-pin contents.

Check seal position and package overlap

The stock-type drain screw includes an O-ring, while the separate drain-seal pack contains four O-rings. Another product names the air-screw needle O-ring and is sold each. Compare the required positions before combining them; similar small seals should be chosen by their identified application rather than appearance alone.

Common ordering questions

Does the float description state that a pin is included?

Yes. It identifies a carb float with pin and gives replacement references, including 16013-405-004. Compare the fitted float and carburetor with that description, then confirm the purchase quantity needed for the work being planned.

Are screws included in the four-O-ring package?

The description identifies four float-bowl drain-screw O-rings. Replacement screws are separate products, including a stock-type screw with its O-ring supplied. Compare which parts are required before adding both a seal-only pack and new screw-and-seal purchases.

Can I choose the felt shaft seals from the year alone?

That product is expressly for compatible Keihin PD carburetors. Identify the carburetors on the motorcycle before selecting those felt seals. A model-year listing does not establish that a changed carburetor assembly has the specified throttle-shaft application.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1978 Honda CB550K

Votre panier

×