VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1975 Honda CB550F Supersport — Pièces de bras oscillant

Service the swingarm pivot on your 1975 Honda CB550F with bronze bushings, dust seal caps or locknut hardware matched to the installed assembly. Inspect the pivot and existing bushings before choosing parts; a bushing set is not a complete swingarm rebuild kit.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Pièces de bras oscillant

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 CB650 CB550 swingarm dust seal cap (set 2) 52144-362-000

Honda CB Swingarm Dust Seal Cap (Set/2) ~ Replaces 52144-362-000

$16.95 USD
73-1028
Replace your swingarm dust seal caps with this Swingarm Dust Seal Cap Set of 2. These caps go on the ends of the swingarm...
Nouveau
Honda CB750 CB550 CB500 rear shock swingarm bushing 40548-268-000

Honda CB Rear Shock Swingarm Bushing ~ Replaces 40548-268-000

$6.20 USD
28-6918
Rear shock swingarm bushing designed to replace the original Honda component, matching OEM reference 40548-268-000. Fits between the shock and swingarm to provide proper...
Honda CB750 CB550 swingarm pivot bolt locknut w washer 90354-268-000

Honda CB Swingarm Pivot Bolt Locknut with Washer ~ Replaces 90354-268-000

$7.00 USD
29-7022
Replace your swingarm pivot bolt locknut and washer with this Swingarm Pivot Bolt Locknut with Locknut Washer. Replaces OEM #90354-268-000 (locknut) and #90526-268-000 (washer).Key...
Épuisé
Honda CB750 CB650 performance kibblewhite bronze swingarm bushing set 52108-457-300

Honda CB High Performance Kibblewhite Bronze Swingarm Bushing Set ~ Replaces 52108-457-300

$69.95 USD
28-1038
Upgrade your swingarm bushings with this Kibblewhite High Performance Bronze Swingarm Bushing Set of 2, replacing OEM #52108-457-300 / #52108-422-300. Made in the USA...
Comparer

1975 Honda CB550F · Swingarm pivot parts Buying guide

Build the pivot order from bushings, seals and hardware

The bronze bushing sets, dust caps and locknut kit address separate parts of the swingarm pivot. Compare the removed pieces and check the pivot condition before selecting a brand or adding supporting hardware.

Parts to consider

Honda CB High Performance Kibblewhite Bronze Swingarm Bushing Set ~ Replaces 52108-457-300 Kibblewhite bronze bushing setSet of two bronze swingarm pivot bushings, made in the USA. Replaces references 52108-457-300 / 52108-422-300.Voir la pièce Honda CB Swingarm Dust Seal Cap (Set/2) ~ Replaces 52144-362-000 Swingarm dust seal cap setSet of two caps for the pivot ends. Replaces reference 52144-362-000.Voir la pièce Honda CB Swingarm Pivot Bolt Locknut with Washer ~ Replaces 90354-268-000 Swingarm pivot locknut and washerLocknut and washer replacing references 90354-268-000 and 90526-268-000.Voir la pièce

Choose one appropriate bushing set

The featured Kibblewhite set contains two bronze pivot bushings and is made in the USA. The linked gunmetal bronze set is another two-piece option listed for the CB550F. Compare the application and removed bushings before choosing one set; the two products are alternatives, not parts that must be combined.

Inspect the pivot beyond the bushings

The dust seal cap package contains two caps for the pivot ends. The separate locknut package contains the locknut and its washer, with no pivot bolt included in those stated contents. Check the pivot bolt, mating surfaces and threads during service, and use the Honda manual for inspection and fitting guidance.

Swingarm Pivot Parts FAQs

Are both bronze bushing sets needed for one swingarm?

No. Each product is a two-piece bushing set listed for the CB550F. Choose the appropriate set for the installed pivot and your preferred brand. Compare the old bushings and confirm the application before ordering either alternative.

Does the locknut kit include the swingarm pivot bolt?

Its stated contents are the pivot locknut and locknut washer, replacing 90354-268-000 and 90526-268-000. Inspect the existing pivot bolt separately; do not count on a new bolt being supplied with this nut-and-washer product.

Are the dust caps included with the bronze bushings?

The dust seal caps are a separate two-piece product, replacing 52144-362-000. They fit at the ends of the swingarm pivot. Check their condition when servicing the bushings and add the cap set if replacement is required.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1975 Honda CB550F Supersport

Votre panier

×