VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1975 Honda CB550F Supersport — Tubes, ressorts, joints et soufflets de fourche

Plan fork service for your 1975 Honda CB550F around the installed fork assembly. Match the seal dimensions and retaining rings, then choose stock-type or shorter gaiters. Replacement springs have model-specific fitting notes, so read those before changing the fork setup.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Tubes, ressorts, joints et soufflets de fourche

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 CB650 CB550 CB500 fork seals

Honda CB750 / CB650 / CB550 / CB500 Fork Seals

$19.95 USD
27-1007
Replace your fork seals with this Fork Seal Set, 35 x 48 x 10.5 / 11mm. High quality, made in Japan. Key Features• Fork...
Honda CB750 CB550 CB500 CB450 fork gaiters 51611-300-000

Honda CB Stock Type Fork Gaitors ~ Replaces 51611-300-000

$29.95 USD
27-1061
Replace your fork gaitors with this Black Stock Type Fork Gaitors Set of 2, replacing OEM #51611-300-000.Key Features• Stock-type black fork gaitors, set of...
Honda CB750 CB650 CB550 CB500 fork seal stopper metal rings (pk 2) 51447-KL4-951

Honda CB750 / CB650 / CB550 / CB500 Fork Seal Stopper Metal Rings (Pk/2) ~ Replaces 51447-KL4-951

$7.95 USD
73-0940
Replace your fork seal stopper metal rings with this Fork Seal Stopper Metal Ring Pk/2, replacing OEM #51447-KL4-951. This is the metal ring above...
Honda CB750 CB550 CB500 CB450 CB400 reflector 33741-340-670

Honda CB Stock Type Reflector ~ Replaces 33741-340-670

$21.46 USD
11-2303
Restore your mid-'70s Honda's stock reflectors with this Stock-Type Screw-On Reflector with a 6mm thread, replacing OEM #33741-340-670. Broad fitment covering the 1972-78 CB750...
Nouveau
Honda CB750 CB550 CB500 CB400 headlight stay headlight reflector bolt 90120-377-000

Honda CB750 / CB550 / CB500 / CB400 Headlight Stay / Headlight Reflector Bolt ~ Replaces 90120-377-000

$8.95 USD
99-4977
Upgrade or restore your classic Honda motorcycle headlight system with this Headlight Stay / Headlight Reflector Bolt — designed to secure the headlight reflector...
Honda CB750 CB550 CB500 CB450 35mm front fork tube bolt with o-ring 90123-300-000

Honda CB750 / CB550 / CB500 / CB450 35mm Front Fork Tube Bolt with O-Ring ~ Replaces Honda OEM 90123-300-000

$17.95 USD
29-6013
This aftermarket 35mm front fork tube bolt is used as the top cap/bolt on compatible Honda CB 35mm fork tubes. It replaces Honda OEM...
Honda CB750A CB550F CB550K Progressive type front fork springs

1974-78 Honda CB750A / CB550F / CB550K Progressive Type Front Fork Springs

$84.95 USD
33-0005
Upgrade your fork performance with this Progressive Type Front Fork Spring Set of 2, including 10" pipe and washers. Progressive springs improve handling and...
Honda CB750 CB650 CB550 front fork damper valve set

Honda CB750 / CB650 / CB550 Front Fork Damper Valve Set

$79.95 USD
27-1886
Upgrade your 35mm rod-style front forks to perform like modern cartridge forks with this Front Fork Damper Valve Set of 2. These tunable valves...
Honda CB750 CB550 CB500 CB450 CL450K5 fork gaiters 51611-300-000

Honda CB Fork Gaitors ~ Replaces 51611-300-000

$29.95 USD
27-1089
Replace your fork gaitors with this Black Fork Gaitors Set of 2, replacing OEM #51611-300-000.Note: these are about 1.75" shorter than the stock type...
Universal motorcycle fork cap wrench 35mm

Universal Motorcycle Fork Cap Wrench ~ 35mm

$7.00 USD
35-9113
Fork Cap Wrench ~ 35MM Size for custom or restoration work on classic Honda CB motorcycles.  Key Features Aftermarket part Sold as: Each Fitment...
Voir les détails
Honda CB750 CB550 CB500 fork boot collars joker machine

Honda CB750 / CB550 / CB500 Fork Boot Collars ~ Joker Machine

$99.95 USD
12-0072
Get a café look while keeping your OEM fork gaiters with these Joker Machine Custom Fully CNC Machined Fork Boot Collars, set of 2....
Comparer

1975 Honda CB550F · Fork seals, springs & boots Buying guide

Choose fork service parts by dimensions and boot design

Fork seals, retaining rings, caps and gaiters serve separate locations. Compare each worn piece before ordering, and keep the CB550F spring fitting notes separate from the spacer instructions for other Honda models.

Parts to consider

Honda CB750 / CB650 / CB550 / CB500 Fork Seals Fork seal setMade-in-Japan seals, 35 × 48 × 10.5/11 mm. Listed for the 1975 CB550F.Voir la pièce Honda CB750 / CB650 / CB550 / CB500 Fork Seal Stopper Metal Rings (Pk/2) ~ Replaces 51447-KL4-951 Fork seal retaining ringsPack of two metal rings fitted above the fork seals. Replaces reference 51447-KL4-951.Voir la pièce Honda CB Stock Type Fork Gaitors ~ Replaces 51611-300-000 Stock-type black fork gaitersSet of two stock-type gaiters for the 1975–76 CB550F. Replaces reference 51611-300-000.Voir la pièce

Pièces connexes : Progressive-type fork spring set · Fork cap with O-ring · Shorter black fork gaiter set

Compare the two gaiter options

The featured stock-type gaiters and the linked shorter gaiters are both supplied as sets of two for the 1975–76 CB550F. The shorter version is approximately 1.75 inches shorter than the stock-type design. Compare the attachment points and needed coverage before choosing between them, especially with changed headlight mounts.

Follow the CB550F spring notes

The linked progressive-type spring set contains two springs, a ten-inch pipe and washers. Its CB550F application specifically does not use the supplied spacers or washers. Do not apply another model’s pipe-cutting instructions to this bike; check the product instructions and the Honda manual for the installed fork assembly.

Fork Seals, Springs & Boots FAQs

Are retaining rings supplied with the fork seals?

The seal set and retaining-ring pack are separate products. The ring pack contains two metal rings that fit above the seals, replacing reference 51447-KL4-951. Inspect the old rings and order the pack separately if replacements are needed.

Should I cut the included pipe into CB550F spring spacers?

The linked spring product specifically says its spacers and washers are not used with the CB550F. Follow that model-specific note and the installation instructions rather than assuming the supplied pipe is needed on every listed Honda application.

Does the replacement fork cap include its O-ring?

The linked aftermarket cap replaces reference 90123-300-000 and includes its O-ring. It is sold individually and has an M28 × 1.5 thread. Compare the installed cap and fork assembly, then order the quantity required for your service.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1975 Honda CB550F Supersport

Votre panier

×