VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1972 Honda CB500K Four — Câbles d’accélérateur et de starter, poignées et tubes

Throttle-control purchases for the 1972 CB500K should distinguish the opening cable, nylon sleeve and grip-friction adjuster. These parts have different functions and separate contents. Match the fitted housing and cable routing before ordering, particularly where handlebars or the right-hand control have been changed.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Câbles d’accélérateur et de starter, poignées et tubes

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 CB550 CB500 throttle cable pull 17910-341-000

Honda CB750 / CB550 / CB500 Throttle Cable ~ Pull ~ Replaces 17910-341-000

$25.95 USD
51-2505
Replace your CB750 throttle pull cable with this Throttle Cable "Pull Type", replacing OEM #17910-341-000. End-to-end length 40". Made in Japan.Key Features• Throttle cable,...
Épuisé
Honda CB throttle sleeve 53141-300-010

Honda CB Throttle Sleeve ~ Replaces 53141-300-010

$9.95 USD
02-2462
Refresh the throttle feel on your Honda with this Nylon Throttle Sleeve, a replacement for OEM Ref. #53141-300-010 with exceptionally broad fitment across the...
Honda CB750 CB550 CB500 CB360 throttle adjusting bolt 53190-300-000

Honda CB Throttle Adjusting Bolt ~ Replaces 53190-300-000

$9.95 USD
73-0846
Replace your throttle adjusting bolt with this Throttle Adjusting Bolt, replacing OEM #53190-300-000.Key Features• Throttle adjusting bolt• Replaces OEM #53190-300-000• Honda part name: Bolt,...
Honda CB750 CB550 CB500 CB360 throttle adjusting spring 53191-300-000

Honda CB Throttle Adjusting Spring ~ Replaces 53191-300-000

$9.50 USD
73-0847
Replace your throttle adjusting spring with this Throttle Adjusting Spring, replacing OEM #53191-300-000.Key Features• Throttle adjusting spring• Replaces OEM #53191-300-000• Honda part name: Spring,...
Comparer

1972 Honda CB500K · Throttle Cable, Tube & Adjuster Buying guide

Identify the cable function and the worn grip component

The pull cable is specified at 40 inches end to end. The sleeve is a bare nylon tube, and the adjusting bolt acts on grip friction rather than carburetor idle speed. Compare the existing controls before choosing any combination.

Parts to consider

Honda CB750 / CB550 / CB500 Throttle Cable ~ Pull ~ Replaces 17910-341-000 40-inch pull/opening cableOne Japanese-made cable referenced to 17910-341-000; the opposite cable is separate.Voir la pièce Honda CB Throttle Sleeve ~ Replaces 53141-300-010 Bare nylon throttle tubeReference 53141-300-010; rubber grip, cables and housing are not supplied.Voir la pièce Honda CB Throttle Adjusting Bolt ~ Replaces 53190-300-000 Throttle-grip friction boltReference 53190-300-000 for the compatible right-hand control, not a carb idle screw.Voir la pièce

Pièces connexes : Matching grip-friction adjuster spring

Compare length and function together

The cable’s 40-inch length alone is not enough to choose it. The source names a pull or opening cable and calls for checking end fittings, model application and routing. Changes to handlebar height or control position can alter the required path, so compare the fitted cable before ordering.

A grip component is different from a carburetor adjustment

The current bolt and spring FAQs identify the throttle-grip friction mechanism. They are not carburetor parts and should not be chosen to correct an idle problem. The nylon tube also has its own bare-part contents, so inspect the control housing and sleeve separately from the cable system.

Common questions

What cable specification matters when the handlebars are no longer stock?

The opening cable is 40 inches end to end and references 17910-341-000. Compare the current routed length, end fittings and pull function. One Japanese-made cable is supplied; changed bars can require a different length, and the opposite cable is separate.

Which components must be retained with the nylon throttle tube?

The bare sleeve references 53141-300-010 and excludes the rubber grip, cables, housing and fasteners. Compare those retained pieces with the fitted bar and control before ordering a sleeve-only replacement, particularly where aftermarket controls or bars are installed.

What is adjusted by the small bolt and spring?

They are the right-control grip-friction parts, referencing bolt 53190-300-000 and spring 53191-300-000. Each is supplied separately. Match the fitted control before ordering; neither part sets carburetor idle speed or acts as the cable free-play adjuster.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1972 Honda CB500K Four

Votre panier

×