VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1972 Honda CB500K Four — Flotteurs et composants de carburateur

A fuel leak or float problem on a 1972 CB500K can require a specific carburetor component rather than another full kit. Locate the affected joint first. Floats with pins, transfer-tube seals and drain screws have distinct contents; the preset float gauge is only a measuring tool.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Flotteurs et composants de carburateur

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 CB550 CB500 carb fuel line o-ring kit

Honda CB750 / CB550 / CB500 Carb Fuel Line O-Ring Kit

$11.69 USD
48-0791
Refresh all your carb fuel-line and float-bowl seals with this Carb Fuel Line O-Ring Kit, 12 pieces. Includes 8 carb fuel connector tube O-rings...
Honda CB750 CB550 CB500 float bowl drain screw o-rings pk 4

Honda CB750 / CB550 / CB500 Float Bowl Drain Screw O-Rings Pk/4

$5.95 USD
48-0793
Replace your float bowl drain screw with O-ring on these earlier models with this Float Bowl Drain Screw with O-Ring 4-Pack.Key Features• Float bowl...
Honda CB1100 CB1000 CB900 CB750 CB550 air screw needle o-ring

Honda CB Air Screw Needle O-Ring

$1.95 USD
48-5043
Replace your air screw needle O-ring with this Air Screw Needle O-Ring, 2.8mm x 1.2mm.Note: sold each, order the quantity you require.Key Features• Air...
Honda CB750 CB550 CB500 CB450 CB400 float bowl drain screw

Honda CB Stock Type Float Bowl Drain Screw

$7.50 USD
48-5041
Replace your stock-type float bowl drain screw with this Float Bowl Drain Screw with O-Ring.Note: sold each, order the quantity you require.Key Features• Stock-type...
Honda CB750 CB550 CB500 CB360 throttle adjusting bolt 53190-300-000

Honda CB Throttle Adjusting Bolt ~ Replaces 53190-300-000

$9.95 USD
73-0846
Replace your throttle adjusting bolt with this Throttle Adjusting Bolt, replacing OEM #53190-300-000.Key Features• Throttle adjusting bolt• Replaces OEM #53190-300-000• Honda part name: Bolt,...
Honda CB750 CB550 CB500 CB360 throttle adjusting spring 53191-300-000

Honda CB Throttle Adjusting Spring ~ Replaces 53191-300-000

$9.50 USD
73-0847
Replace your throttle adjusting spring with this Throttle Adjusting Spring, replacing OEM #53191-300-000.Key Features• Throttle adjusting spring• Replaces OEM #53191-300-000• Honda part name: Spring,...
Nouveau
Honda CB550F CB550K CB500K CB500T carburetor screw kit

1971-77 Honda CB550 / CB500 Carburetor Screw Kit

$17.50 USD
49-0773
Refresh your CB500 or CB550 carb screws with this Carburetor Screw Kit. Get a new set of screws to clean up the look of...
Honda CB550F CB550K CB500K carb float setting tool

1971-77 Honda CB550F / CB550K / CB500K Carb Float Setting Tool

$15.94 USD
73-0888
Set your carb floats with ease using this Carb Float Setting Tool. Use this tool to help set your floats with ease. This pre-set...
Honda CB550F CB550K CB500K carb float 16013-329-004

1971-77 Honda CB550F / CB550K / CB500K Carb Float ~ Replaces 16013-329-004

$28.95 USD
20-6511
Replace your CB500 or CB550 carb float with this Carb Float with Pin, replacing OEM #16013-329-004.4 carb floats are used per bike, order the...
Comparer

1972 Honda CB500K · Carb Floats, Seals & Hardware Buying guide

Locate the problem before selecting a seal or float

The available choices separate an individual float, a twelve-piece fuel-seal kit and a drain screw with its O-ring. Check the component and how many carburetors need service. Keep a reusable gauge separate from the replacement items in the order.

Parts to consider

1971-77 Honda CB550F / CB550K / CB500K Carb Float ~ Replaces 16013-329-004 Single carb float and pivot pinReference 16013-329-004; one supplied and four used in the listed complete rack.Voir la pièce Honda CB750 / CB550 / CB500 Carb Fuel Line O-Ring Kit Twelve-piece transfer and drain seal kitEight connector-tube O-rings plus four drain seals, as stated in the description.Voir la pièce Honda CB Stock Type Float Bowl Drain Screw Individual drain screw with O-ringSold individually with its seal; compare the drain seat and installed bowl.Voir la pièce

Pièces connexes : Model-specific preset measuring gauge

Check whether the repair needs a screw or only a seal

The selected drain-screw source includes one screw and its O-ring, whereas the fuel-seal kit contains its specifically listed rubber seals. Inspect the screw and bowl seat before replacing hardware. Neither purchase is presented as a set of carb floats or a complete internal rebuild kit.

Measure with the right tool for the installed carburetors

The gauge is preset for the listed stock CB500K carburetors. It is not a universal tool for another carburetor set, and it contains no replacement fuel parts. Identify any swapped carburetors before using it, then follow the appropriate service method without inventing a float-height value.

Common questions

What comes with each replacement float, and how many are used?

Each float is supplied with its pin under Honda reference 16013-329-004. The compatible rack uses four floats. Confirm the carburetor application and count the positions needing replacement before ordering; the separately offered preset gauge is specified for stock carburetors.

Which joints are covered by the twelve-piece fuel-seal package?

It contains eight fuel-transfer connector O-rings and four bowl-drain seals for the compatible rack. Compare the leaking joint before selecting it. The separate drain screw references 16024-286-004 and includes its own O-ring, which can overlap a drain-seal requirement.

What must match when ordering a stock-type drain screw?

The selected screw references 16024-286-004 and includes one O-ring per individually supplied screw. One is used per carburetor, so four replace all rack positions. Compare the installed bowl and drain seat; new hardware cannot establish compatibility with a changed carburetor.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1972 Honda CB500K Four

Votre panier

×