VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1972 Honda CB500K Four — Pièces de bras oscillant

Before ordering swingarm service parts for a 1972 CB500K, separate the pivot’s bushing, thrust, end-cap and felt positions. The bronze sets and metal caps each come as pairs, but they replace different pieces. Check the retained bolt and locking hardware as well.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Pièces de bras oscillant

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 CB550 CB500 CB450 CB350 swing arm felt set 2 52145-283-000

Honda CB Swing Arm Felt Set/2 ~ Replaces 52145-283-000

$6.76 USD
73-1129
Protect your swingarm and enhance rear suspension longevity with this OEM-style Swing Arm Felt Set. These felts are designed to sit inside the pivot...
Nouveau
Honda CB750 CB550 CB500 rear shock swingarm bushing 40548-268-000

Honda CB Rear Shock Swingarm Bushing ~ Replaces 40548-268-000

$6.20 USD
28-6918
Rear shock swingarm bushing designed to replace the original Honda component, matching OEM reference 40548-268-000. Fits between the shock and swingarm to provide proper...
Honda CB750 CB550 swingarm pivot bolt locknut w washer 90354-268-000

Honda CB Swingarm Pivot Bolt Locknut with Washer ~ Replaces 90354-268-000

$7.00 USD
29-7022
Replace your swingarm pivot bolt locknut and washer with this Swingarm Pivot Bolt Locknut with Locknut Washer. Replaces OEM #90354-268-000 (locknut) and #90526-268-000 (washer).Key...
Solde
Honda CB750 CB550 CB500 bronze thrust bushing set 2 52109-283-300

Honda CB Bronze Thrust Bushing Set/2 ~ Replaces 52109-283-300

$31.72 $24.95 USD
You save $6.77
73-0883
Upgrade your swingarm bushings with this Bronze Thrust Bushing Set of 2. Replace the cheaply made, worn-out factory swingarm bushings with a 2-piece set...
Honda CB750 CB550 CB500 CB450 swingarm grease fitting nipple (pk 2) 96201-30001

Honda CB Swingarm Grease Fitting Nipple (Pk/2)

$7.95 USD
73-0941
Replace your swingarm grease fittings with this Grease Fitting Nipple A .45 Pk/2. These fittings are used with the swingarm. Replaces OEM #96201-30001.Key Features•...
Honda CB750 CB550 CB500 swingarm dust seal cap (set 2) 52144-283-010

Honda CB Swingarm Dust Seal Cap (Set/2) ~ Replaces 52144-283-010

$9.95 USD
29-7024
Replace your swingarm dust seal caps with this Swingarm Dust Seal Metal Cap Set of 2. These metal caps fit on the ends of...
Honda CB550K CB500K bronze swingarm bushing set

1971-75 Honda CB550K / CB500K Bronze Swingarm Bushing Set

$74.95 USD
28-1025
Upgrade your CB500K or CB550K plastic swingarm bushings to bronze with this Gunmetal Bronze Swingarm Bushing Set of 2. Replaces the factory plastic OEM-type...
Comparer

1972 Honda CB500K · Swing Arm Parts Buying guide

List the worn pivot pieces before calculating quantities

A long bronze bushing pair and a separate thrust bushing pair support different selections within the pivot assembly. End caps, felts and locknut hardware have their own references; inspect each original piece when planning the repair.

Parts to consider

1971-75 Honda CB550K / CB500K Bronze Swingarm Bushing Set Bronze pivot bushing pairSet of two gunmetal bronze swingarm bushings for CB500K 1971–73. This pair replaces the listed plastic bushings; other pivot components are separate.Voir la pièce Honda CB Bronze Thrust Bushing Set/2 ~ Replaces 52109-283-300 Two bronze thrust bushingsTwo-piece thrust bushing set referencing 52109-283-300. Compare the pivot position and existing components; it is a different listing from the long bronze swingarm bushing pair.Voir la pièce Honda CB Swingarm Dust Seal Cap (Set/2) ~ Replaces 52144-283-010 Metal pivot end-cap pairTwo metal dust-seal caps referencing 52144-283-010, positioned at the swingarm pivot ends. They do not form a supplied set with the separately listed felts.Voir la pièce

Pièces connexes : Left and right pivot felts · Pivot locking hardware

A bushing pair is only its stated pair

The gunmetal bronze set contains two CB500K-listed swingarm bushings replacing the specified plastic parts. The thrust set also contains two pieces but references 52109-283-300. Compare their shapes and assembly positions rather than treating the same material and piece count as proof that the sets substitute for one another.

Check the pivot-end components separately

Metal caps reference 52144-283-010 and felt pieces reference 52145-283-000. The locking hardware lists nut 90354-268-000 with washer 90526-268-000. Each is a separate product group. Use the condition of the original caps, felts and retained fasteners to decide what belongs in the order, without treating any one pair as a full overhaul kit.

Choosing the right parts

Which bronze set replaces the original plastic pivot bushings?

The long swingarm bushing pair replaces the original plastic-type bushings and supplies two pieces. The separate 52109-283-300 thrust set also contains two, but serves the pivot ends; choose the set for the worn component’s position.

Is the felt included with the metal dust cap pair?

The two metal caps reference 52144-283-010. Felt is a separate two-piece 52145-283-000 product for both pivot sides, helping exclude dirt and retain lubricant. Order the felts separately when those pieces also need renewal.

Which retaining hardware matches the original CB500K swingarm pivot?

The listed set pairs 90354-268-000 locknut with 90526-268-000 lock washer for compatible CB500K pivot hardware. Both are supplied. If the swingarm or pivot bolt has changed, confirm that assembly’s hardware requirements before selecting the original-reference set.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1972 Honda CB500K Four

Votre panier

×