VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1972 Honda CB500K Four — Tubes, ressorts, joints et soufflets de fourche

The 1972 CB500K1 fork selection includes size-specific seals, stock-type gaiter pairs and tube-cap bolts with O-rings. Identify whether the damage is at a seal, external boot or top bolt. Reflectors and their supports serve another position and must be checked as separate fittings.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Tubes, ressorts, joints et soufflets de fourche

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 CB650 CB550 CB500 fork seals

Honda CB750 / CB650 / CB550 / CB500 Fork Seals

$19.95 USD
27-1007
Replace your fork seals with this Fork Seal Set, 35 x 48 x 10.5 / 11mm. High quality, made in Japan. Key Features• Fork...
Honda CB750 CB550 CB500 CB450 fork gaiters 51611-300-000

Honda CB Stock Type Fork Gaitors ~ Replaces 51611-300-000

$29.95 USD
27-1061
Replace your fork gaitors with this Black Stock Type Fork Gaitors Set of 2, replacing OEM #51611-300-000.Key Features• Stock-type black fork gaitors, set of...
Honda CB750 CB550 CB500 CB450 CB400 reflector 33741-340-670

Honda CB Stock Type Reflector ~ Replaces 33741-340-670

$21.46 USD
11-2303
Restore your mid-'70s Honda's stock reflectors with this Stock-Type Screw-On Reflector with a 6mm thread, replacing OEM #33741-340-670. Broad fitment covering the 1972-78 CB750...
Honda CB750 CB550 CB500 CB450 CL450K5 fork internal circlip set 94521-48000

Honda CB Fork Internal Circlip Set

$7.95 USD
73-1035
Replace your fork internal circlips with this Fork Internal Circlip (48mm) Set of 2, replacing OEM #94521-48000.Key Features• Fork internal circlips• 48mm• Set of...
Honda CB750 CB550 front reflector rubber base 33743-341-670

Honda CB Stock Type Front Reflector Rubber Base ~ Replaces 33743-341-670

$8.95 USD
11-2304
Fit the rubber base beneath your stock front reflector with this Stock-Type Front Reflector Rubber Base, replacing OEM #33743-341-670.Key Features• Stock-type front reflector rubber...
Honda CB750 CB550 CB500 CB450 CL450K5 fork gaiters 51611-300-000

Honda CB Fork Gaitors ~ Replaces 51611-300-000

$29.95 USD
27-1089
Replace your fork gaitors with this Black Fork Gaitors Set of 2, replacing OEM #51611-300-000.Note: these are about 1.75" shorter than the stock type...
Honda CB500K CB450K CL450K5 front fork tube cap bolt with o-ring 90123-323-010

1971-74 Honda CB500K / CB450K / CL450K5 Front Fork Tube Cap Bolt with O-Ring ~ Replaces Honda OEM 90123-323-010

$23.85 USD
29-6019
Replace a damaged, rusted, or rounded front fork tube cap bolt on the Honda CB500K, CB450K, and supported CL450K applications listed below. This aftermarket...
Honda CB750 CB550 CB500 fork boot collars joker machine

Honda CB750 / CB550 / CB500 Fork Boot Collars ~ Joker Machine

$99.95 USD
12-0072
Get a café look while keeping your OEM fork gaiters with these Joker Machine Custom Fully CNC Machined Fork Boot Collars, set of 2....
Comparer

1972 Honda CB500K · Fork Tubes, Springs, Seals & Boots Buying guide

Match the fork part to the sealing or mounting position

A top bolt’s included O-ring seals a different location from the fork seal set. Boots cover the exterior, and screw-on reflectors use their own threaded mounting. Choose the part for the actual worn component on the installed fork.

Parts to consider

Honda CB750 / CB650 / CB550 / CB500 Fork Seals 35 × 48mm fork seal setFork seals made in Japan, with the stated 35 × 48 × 10.5/11mm dimensions. The detailed fitment names the 1972 CB500K1; check the installed forks before ordering.Voir la pièce 1971-74 Honda CB500K / CB450K / CL450K5 Front Fork Tube Cap Bolt with O-Ring ~ Replaces Honda OEM 90123-323-010 Top fork bolt including O-ringIndividually sold tube-cap bolt referencing 90123-323-010, with O-ring included. The exact listed application includes CB500K1 1972.Voir la pièce Honda CB Stock Type Fork Gaitors ~ Replaces 51611-300-000 Black stock-type gaiter setPair of stock-type accordion fork boots referencing 51611-300-000. Check the upper and lower attachment arrangement, particularly if the headlight mounts have been changed.Voir la pièce

Pièces connexes : 6mm screw-on reflector

The O-ring supplied with a top bolt is not a fork seal

The aftermarket cap bolt referencing 90123-323-010 includes its O-ring and expressly names CB500K1 1972. It is sold individually. The seal set has a different size specification and installation position, so a top-bolt purchase should not be read as a fork seal or full fork rebuild package.

Choose boot length and reflector attachment separately

The featured stock-type boots come as two pieces. Another gaiter pair in the range is described as approximately 1.75 inches shorter. The screw-on reflector uses a 6mm thread and reference 33741-340-670. Compare the fitted boots and reflector mounts independently rather than combining their shared fork location into one assumed kit.

Choosing the right parts

What is the full replacement fork-seal specification?

The set supplies two Japanese-made seals at 35 × 48 × 10.5/11mm and lists the 1972 CB500K. Match the complete seal profile after a fork change rather than choosing from tube diameter alone.

How do the stock-type and shorter gaiter pairs compare?

Both black pairs replace 51611-300-000 and supply two gaiters. The alternate pair is approximately 1.75 inches shorter than stock; choose the stock-type pair when preserving the original boot length and appearance is the aim.

Are both top bolts supplied in one order?

One 90123-323-010 cap bolt with its O-ring is included per order; both fork tops require two. The separately listed 48mm internal circlips come as a pair, so their package quantity is different.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1972 Honda CB500K Four

Votre panier

×