VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1971 Honda CB500K Four — Pipes d’admission, manchons et colliers

The 1971 CB500K intake rubber listings separate engine-side carb holders from carburetor-to-airbox boots. Both are four-piece sets, but the required clamps differ. A stainless support bracket is another option for the listed custom intake setups; it does not replace either rubber set.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Pipes d’admission, manchons et colliers

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB550F CB550K CB500K carb holder set 16211-323-000

1971-77 Honda CB550F / CB550K / CB500K Carb Holder Set ~ Replaces 16211-323-000

$54.95 USD
48-1476
Replace your CB500K, CB550K, or CB550F Supersport carb holders with this Carb Holder Set of 4. Replaces those old cracked or dried-up carb holders....
Honda CB550F CB550K CB500K carb air box rubber boot set 4

1971-77 Honda CB550F / CB550K / CB500K Carb Air Box Rubber Boot Set/4

$89.95 USD
73-0137
Replace your CB500 or CB550 carb-to-air-box boots with this Carburetor to Air Box Rubber Boot Set of 4. Replaces your old worn, cracked, or...
Honda CB550K CB500K carburetor stabilizer bracket

1971-76 Honda CB550K / CB500K Carburetor Stabilizer Bracket

$49.95 USD
29-0540
Stabilize your CB500 or CB550 carburetors when running pods or hardtails with this Carburetor Stabilizer Bracket. High-quality stainless steel, made in Canada. A must-have...
Comparer

1971 Honda CB500K · Carb Holders & Airbox Boots Buying guide

Choose the rubber set for the joint being serviced

Match the cylinder-head side or airbox side before ordering. The holders call for eight 41–44mm clamps, while the airbox boots call for four 45–47mm clamps when replacement clamps are needed. Confirm which existing parts remain usable.

Parts to consider

1971-77 Honda CB550F / CB550K / CB500K Carb Holder Set ~ Replaces 16211-323-000 Four-piece carb holder setEngine-side set replacing 16211-323-000; replacement clamps are separate.Voir la pièce 1971-77 Honda CB550F / CB550K / CB500K Carb Air Box Rubber Boot Set/4 Four-piece carb-to-airbox boot setFour boots for the listed stock-airbox application; check the specified clamps.Voir la pièce 1971-76 Honda CB550K / CB500K Carburetor Stabilizer Bracket Stainless carburetor support bracketCanadian-made bracket listed for compatible pod-filter or no-airbox setups.Voir la pièce

The two clamp specifications are different

The holder source specifies eight 41–44mm band clamps for a complete installation. The airbox-boot source specifies four 45–47mm clamps when replacements are needed. These clamp references explain ordering requirements; they do not mean clamps come with either rubber set or are available in this model category.

Support and sealing are separate jobs

The bracket is listed to support the carburetor rack when using pods or a no-airbox setup. It is not an intake holder, airbox boot or clamp. Check the layout and installed support before choosing it, and match any rubber replacements to the joints retained on the motorcycle.

Common questions

Do the four carb holders include band clamps?

The four-holder set references 16211-323-000, with clamps explicitly separate. A complete installation uses eight 41–44 mm clamps when replacements are needed. Inspect the existing clamps before ordering additional hardware; the airbox boot side uses a different size and quantity.

Which clamps are specified for the retained airbox boots?

The four-boot package calls for four 45–47 mm replacement clamps, one per boot when the originals need replacement. Engine-side holders instead specify eight 41–44 mm clamps. Match the actual joint before choosing by clamp diameter or package count.

When is the stainless rack-support bracket relevant to the order?

The bracket supports the compatible four-carb rack when stock airbox support is removed for pods or the listed custom setup. One bracket services the rack. Confirm the fitted intake arrangement before adding support alongside separately chosen holders, boots or filters.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1971 Honda CB500K Four

Votre panier

×