VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1971 Honda CB500K Four — Flotteurs et composants de carburateur

For the 1971 CB500K Four, distinguish a replacement float from fuel-transfer seals, a drain screw and a measuring tool. These listings address different carburetor jobs and have different supplied quantities. Check the leak location and installed components before building the order.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Flotteurs et composants de carburateur

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 CB550 CB500 carb fuel line o-ring kit

Honda CB750 / CB550 / CB500 Carb Fuel Line O-Ring Kit

$11.69 USD
48-0791
Refresh all your carb fuel-line and float-bowl seals with this Carb Fuel Line O-Ring Kit, 12 pieces. Includes 8 carb fuel connector tube O-rings...
Honda CB750 CB550 CB500 float bowl drain screw o-rings pk 4

Honda CB750 / CB550 / CB500 Float Bowl Drain Screw O-Rings Pk/4

$5.95 USD
48-0793
Replace your float bowl drain screw with O-ring on these earlier models with this Float Bowl Drain Screw with O-Ring 4-Pack.Key Features• Float bowl...
Honda CB1100 CB1000 CB900 CB750 CB550 air screw needle o-ring

Honda CB Air Screw Needle O-Ring

$1.95 USD
48-5043
Replace your air screw needle O-ring with this Air Screw Needle O-Ring, 2.8mm x 1.2mm.Note: sold each, order the quantity you require.Key Features• Air...
Honda CB750 CB550 CB500 CB450 CB400 float bowl drain screw

Honda CB Stock Type Float Bowl Drain Screw

$7.50 USD
48-5041
Replace your stock-type float bowl drain screw with this Float Bowl Drain Screw with O-Ring.Note: sold each, order the quantity you require.Key Features• Stock-type...
Honda CB750 CB550 CB500 CB360 throttle adjusting bolt 53190-300-000

Honda CB Throttle Adjusting Bolt ~ Replaces 53190-300-000

$9.95 USD
73-0846
Replace your throttle adjusting bolt with this Throttle Adjusting Bolt, replacing OEM #53190-300-000.Key Features• Throttle adjusting bolt• Replaces OEM #53190-300-000• Honda part name: Bolt,...
Honda CB750 CB550 CB500 CB360 throttle adjusting spring 53191-300-000

Honda CB Throttle Adjusting Spring ~ Replaces 53191-300-000

$9.50 USD
73-0847
Replace your throttle adjusting spring with this Throttle Adjusting Spring, replacing OEM #53191-300-000.Key Features• Throttle adjusting spring• Replaces OEM #53191-300-000• Honda part name: Spring,...
Nouveau
Honda CB550F CB550K CB500K CB500T carburetor screw kit

1971-77 Honda CB550 / CB500 Carburetor Screw Kit

$17.50 USD
49-0773
Refresh your CB500 or CB550 carb screws with this Carburetor Screw Kit. Get a new set of screws to clean up the look of...
Honda CB550F CB550K CB500K carb float setting tool

1971-77 Honda CB550F / CB550K / CB500K Carb Float Setting Tool

$15.94 USD
73-0888
Set your carb floats with ease using this Carb Float Setting Tool. Use this tool to help set your floats with ease. This pre-set...
Honda CB550F CB550K CB500K carb float 16013-329-004

1971-77 Honda CB550F / CB550K / CB500K Carb Float ~ Replaces 16013-329-004

$28.95 USD
20-6511
Replace your CB500 or CB550 carb float with this Carb Float with Pin, replacing OEM #16013-329-004.4 carb floats are used per bike, order the...
Comparer

1971 Honda CB500K · Floats & Carb Components Buying guide

Identify the carburetor component and quantity first

The float listing supplies one float with its pin, the transfer O-ring kit lists twelve seals, and a drain screw comes with its own O-ring. The preset float gauge is a tool, not another replacement fuel part.

Parts to consider

1971-77 Honda CB550F / CB550K / CB500K Carb Float ~ Replaces 16013-329-004 Individual carb float with pinOne float and pin; the listed CB500K Four uses four floats.Voir la pièce Honda CB750 / CB550 / CB500 Carb Fuel Line O-Ring Kit Twelve-piece carb fuel seal kitEight connector-tube O-rings and four float-bowl drain seals are explicitly listed.Voir la pièce Honda CB Stock Type Float Bowl Drain Screw Drain screw with O-ringOne stock-type drain screw and its O-ring; order the quantity being replaced.Voir la pièce

Pièces connexes : Preset float-setting tool

Match seals to the actual leak location

The fuel seal kit lists connector-tube O-rings and float-bowl drain seals. It is not a set of bowl perimeter gaskets or air-screw seals. Identify the joint being serviced and read the contents before buying another seal separately; similar-looking O-rings do not establish the same application.

Keep the measuring tool separate from the repair parts

The float-setting product is a reusable preset gauge for the listed stock carburetors. It does not include floats or valves. Choose replacement floats and needle-and-seat parts from their own listings, and use the appropriate Honda procedure for any checking or adjustment rather than guessing a dimension.

Common questions

How many floats does one order supply?

One float and its pin are supplied under Honda reference 16013-329-004. Four are used across the compatible rack. Compare the installed carburetor application and count the positions needing replacement before ordering individual floats for a partial or complete repair.

What is in the carb fuel-line O-ring kit?

The twelve pieces are eight fuel-connector-tube O-rings and four bowl-drain seals. The kit services the compatible rack’s transfer connections. Drain screws and bowl-perimeter gaskets are not named contents, so identify the leaking joint before adding separate hardware or gaskets.

What carburetor application must match the preset float gauge?

The gauge is specified for stock 1971–73 CB500K, 1974–76 CB550K and 1975–77 CB550F carburetors. It is preset, rather than universal. Confirm the actual carburetor set before ordering if a previous owner has installed replacement or modified carburetors.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1971 Honda CB500K Four

Votre panier

×